[PATCH v2] arm64: dts: rockchip: fix label of sys_led for nanopi-r4s

[Vic B]

This commit corrects the system LED configuration for the NanoPi R4S by
replacing the deprecated label property with color and function.

This changes the resulting label of mislabeled sys_led from red:power
to green:status, while the labels of the other two leds stay intact
(green:lan for lan_led and green:wan for wan_led).

Signed-off-by: Vic B <linux at vicb.net>
---
Changes in v2:

  - use color and function instead of deprecated label as suggested
    by Sashiko AI
---
 arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
index 4274d1b6e80a..4ad012a9bdc8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
@@ -14,6 +14,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/leds/common.h>
 #include "rk3399-nanopi4.dtsi"
 
 / {
@@ -25,19 +26,22 @@ gpio-leds {
 		/delete-node/ led-0;
 
 		lan_led: led-lan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
 			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
-			label = "green:lan";
 		};
 
 		sys_led: led-sys {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-			label = "red:power";
 			default-state = "on";
 		};
 
 		wan_led: led-wan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
 			gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-			label = "green:wan";
 		};
 	};
 
-- 
2.47.3