[PATCH v3 1/4] dt-bindings: media: snps,dw-hdmi-rx: add #sound-dai-cells

[Krzysztof Kozlowski]

On Sat, Jul 18, 2026 at 10:57:25AM +0200, Igor Paunovic wrote:
 
> diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> index b7f6c87..fa6cd0d 100644
> --- a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> +++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> @@ -78,6 +78,13 @@ properties:
>        The phandle of the syscon node for the Video Output GRF register
>        to enable EDID transfer through SDAIN and SCLIN.
>  
> +  "#sound-dai-cells":
> +    const: 1
> +    description:
> +      The HDMI RX controller has two digital audio interfaces, one for
> +      I2S and one for S/PDIF. The DAI cell selects the interface, 0 for
> +      I2S and 1 for S/PDIF.
> +

Schema should also reference dai-common.yaml and use
"unevaluatedProperties: false".

>  required:
>    - compatible
>    - reg
> @@ -129,4 +136,6 @@ examples:
>        pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_5v_detection>;
>        pinctrl-names = "default";
>        hpd-gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
> +      /* referenced by a sound card as <&hdmi_receiver 0> (0: I2S, 1: S/PDIF) */

Drop comment, not needed. Consumer is not really relevant.

Best regards,
Krzysztof