[PATCH v3 4/4] arm64: dts: rockchip: enable HDMI RX audio capture on Orange Pi 5 Plus

[Sebastian Reichel]

Hi,

On Sat, Jul 18, 2026 at 10:57:28AM +0200, Igor Paunovic wrote:
> Route the HDMI receiver audio to i2s7_8ch, the receive-only I2S
> interface dedicated to HDMI RX, through a simple-audio-card with the
> receiver as bitclock and frame master. Together with the audio
> capture support in the snps_hdmirx driver this exposes a capture-only
> ALSA card fed by the HDMI input.
> 
> Tested on the Orange Pi 5 Plus with multiple HDMI sources: capture
> follows the source sample rate and stays in sync via the FIFO-level
> clock tracking in the driver.
> 
> Signed-off-by: Igor Paunovic <royalnet026 at gmail.com>
> ---
> New in v3.
> 
>  .../dts/rockchip/rk3588-orangepi-5-plus.dts   | 20 +++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
> index 9950d11..d5840e1 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
> @@ -37,6 +37,22 @@
>  		};
>  	};
>  
> +	hdmiin-sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "rockchip,hdmiin";

The name is exposed to userspace and visible to the user (e.g.
in alsamixer), but also used by Alsa UCM2. I suggest to use
"RK3588 HDMI-IN".

> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,bitclock-master = <&hdmiin_codec>;
> +		simple-audio-card,frame-master = <&hdmiin_codec>;
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&i2s7_8ch>;
> +		};
> +
> +		hdmiin_codec: simple-audio-card,codec {
> +			sound-dai = <&hdmi_receiver 0>;
> +		};
> +	};
> +

Move the whole card definition to rk3588-extra.dtsi with a new label
(e.g. hdmi_receiver_sound) and add status = "disabled"; Then just do

&hdmi_receiver_sound {
    status = "okay";
};

in the Orange Pi 5+ DT, i.e. just like the soundcards for HDMI
output. This reduces a lot of duplication as the soundcard is the
same on all boards considering there is a dedicated I2S channel for
it. It's disabled by default as some boards do not route the HDMI
receiver at all.

Greetings,

-- Sebastian

>  	ir-receiver {
>  		compatible = "gpio-ir-receiver";
>  		gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
> @@ -247,6 +263,10 @@
>  	status = "okay";
>  };
>  
> +&i2s7_8ch {
> +	status = "okay";
> +};
> +
>  &led_blue_gpio {
>  	gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
>  	status = "okay";
> -- 
> 2.53.0
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20260719/150c495a/attachment-0001.sig>