[PATCH v10 0/4] Add support for Orange Pi 5 Pro

[Heiko Stuebner]

On Sun, 10 May 2026 21:53:46 -0500, Dennis Gilmore wrote:
> This series adds initial support for the Xunlong Orange Pi 5 Pro, based on
> the Rockchip RK3588S SoC. The board features eMMC, SD card, NVMe (PCIe),
> a Motorcomm YT6801 NIC (PCIe), WiFi/BT (BCM43456), HDMI connected to SoC
> (Second port is disabled in this patch), and a 40-pin expansion header.
> 
> The series was tested against Linux 7.0
> 
> [...]

Applied, thanks!

[1/4] dt-bindings: arm: rockchip: Add Orange Pi 5 Pro
      commit: beca9854e249515fb1ff4c575c875a85df9961dc
[2/4] arm64: dts: rockchip: rk3588s-orangepi-5: rename PLDO regulator labels to match schematic
      commit: f724b899d0f30d78a7b2c3f025aa826cd3f5eccd
[3/4] arm64: dts: rockchip: refactor items from Orange Pi 5/b to prep for Pro
      commit: d20f5368a4db0a70a5a7d3deb06553aae61f4ac8
[4/4] arm64: dts: rockchip: Add Orange Pi 5 Pro board support
      commit: 4d6c68f39300bc52dacd204d08a4470ab2524726

Sorry for the wait.


Best regards,
-- 
Heiko Stuebner <heiko at sntech.de>