[PATCH v7 08/10] accel/rocket: add RK3576 NPU (RKNN) support

[Igor Paunovic]

Hi Jiaxing,

A short logistics note so you can plan around me rather than wait on
silence: yes to both. I will read what the vendor stack actually
programs into the output stage on RK3588 (your option A vs a floor
enable), and separately force an output below its zero point through
the open stack, so the two explanations get separated on this SoC.

I am pairing that with the oc=56/88/120 sweep you asked for earlier,
as one measurement session - numbers in the coming days. If either
result is going to gate something in your v9 timing, say so and I will
reorder.

The correction itself, with the control run and the paper-trail rounds
behind it, reads solid from here.

Regards,
Igor