[PATCH v6 0/4] can: rockchip: add RK3588 CAN support

[Marc Kleine-Budde]

On 30.07.2026 22:34:01, Cunhao Lu wrote:
> Add support for the RK3588 CAN controller.
>
> RK3588 integrates three CAN-FD controllers that are closely related to
> the existing Rockchip CAN-FD IP already supported in the kernel. The
> RK3588 variant is not fully compatible with RK3568v2 because the RX
> FIFO count register field has a different layout.
>
> This series therefore:
>
> - extends the existing Rockchip CAN-FD binding with the
>   rockchip,rk3588-canfd compatible
> - adds a dedicated RK3588 match entry and devtype in the driver

I'll take the first 2 patches.

> - describes the three CAN controller nodes in rk3588-base.dtsi
> - enables CAN on the RK3588 Tiger Haikou board

The DT changes should probably go via the rockchip tree.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20260817/abeacf41/attachment.sig>