[PATCH 3/6] dt-bindings: display: panel: document Anbernic TD4310 panel

[Chris Morgan]

From: Chris Morgan <macromorgan at hotmail.com>

The panel used by Anbernic in the RG Vita-Pro is a DSI panel based
on the TD4310 controller IC. It measures approximately 5.5 inches
diagonally and is 1080x1920 in resolution.

Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
 .../display/panel/anbernic,td4310.yaml        | 63 +++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/anbernic,td4310.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/anbernic,td4310.yaml b/Documentation/devicetree/bindings/display/panel/anbernic,td4310.yaml
new file mode 100644
index 000000000000..2da957cd5d49
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/anbernic,td4310.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/anbernic,td4310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Anbernic TD4310 Based Panels
+
+maintainers:
+  - Chris Morgan <macromorgan at hotmail.com>
+
+description:
+  Bindings for Anbernic TD4310 Based Panels, such as the RG-Vita-Pro
+  panel (a 1080x1920 5.5 inch panel).
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: anbernic,panel-vita-pro
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Panel power supply
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel at 0 {
+            compatible = "anbernic,panel-vita-pro";
+            reg = <0>;
+            backlight = <&backlight>;
+            enable-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+            rotation = <270>;
+            vdd-supply = <&vdd_lcd>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.43.0