[PATCH v2 1/2] PCI: dw-rockchip: Add L1sub support

[Hans Zhang]

On 10/22/2025 7:35 PM, Shawn Lin wrote:
> EXTERNAL EMAIL
> 
> The driver should set app_clk_req_n(clkreq ready) of PCIE_CLIENT_POWER reg
> to support L1sub. Otherwise, unset app_clk_req_n and pull down CLKREQ#.
> 
> Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>
> 
> ---
> 
> Changes in v2:
> - drop of_pci_clkreq_presnt API
> - drop dependency of Niklas's patch
> 
>   drivers/pci/controller/dwc/pcie-dw-rockchip.c | 36 +++++++++++++++++++++++++++
>   1 file changed, 36 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> index 3e2752c..18cd626 100644
> --- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> +++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> @@ -62,6 +62,12 @@
>   /* Interrupt Mask Register Related to Miscellaneous Operation */
>   #define PCIE_CLIENT_INTR_MASK_MISC     0x24
> 
> +/* Power Management Control Register */
> +#define PCIE_CLIENT_POWER              0x2c
> +#define  PCIE_CLKREQ_READY             0x10001
> +#define  PCIE_CLKREQ_NOT_READY         0x10000
> +#define  PCIE_CLKREQ_PULL_DOWN         0x30001000
> +
>   /* Hot Reset Control Register */
>   #define PCIE_CLIENT_HOT_RESET_CTRL     0x180
>   #define  PCIE_LTSSM_APP_DLY2_EN                BIT(1)
> @@ -85,6 +91,7 @@ struct rockchip_pcie {
>          struct regulator *vpcie3v3;
>          struct irq_domain *irq_domain;
>          const struct rockchip_pcie_of_data *data;
> +       bool supports_clkreq;
>   };
> 
>   struct rockchip_pcie_of_data {
> @@ -200,6 +207,31 @@ static bool rockchip_pcie_link_up(struct dw_pcie *pci)
>          return FIELD_GET(PCIE_LINKUP_MASK, val) == PCIE_LINKUP;
>   }
> 
> +static void rockchip_pcie_enable_l1sub(struct dw_pcie *pci)
> +{
> +       struct rockchip_pcie *rockchip = to_rockchip_pcie(pci);
> +       u32 cap, l1subcap;
> +
> +       /* Enable L1 substates if CLKREQ# is properly connected */
> +       if (rockchip->supports_clkreq) {
> +               /* Ready to have reference clock removed */
> +               rockchip_pcie_writel_apb(rockchip, PCIE_CLKREQ_READY, PCIE_CLIENT_POWER);
> +               return;
> +       }
> +
> +       /* Otherwise, pull down CLKREQ# and disable L1 substates */
> +       rockchip_pcie_writel_apb(rockchip, PCIE_CLKREQ_PULL_DOWN | PCIE_CLKREQ_NOT_READY,
> +                                PCIE_CLIENT_POWER);
> +       cap = dw_pcie_find_ext_capability(pci, PCI_EXT_CAP_ID_L1SS);
> +       if (cap) {
> +               l1subcap = dw_pcie_readl_dbi(pci, cap + PCI_L1SS_CAP);
> +               l1subcap &= ~(PCI_L1SS_CAP_L1_PM_SS | PCI_L1SS_CAP_ASPM_L1_1 |
> +                             PCI_L1SS_CAP_ASPM_L1_2 | PCI_L1SS_CAP_PCIPM_L1_1 |
> +                             PCI_L1SS_CAP_PCIPM_L1_2);
> +               dw_pcie_writel_dbi(pci, cap + PCI_L1SS_CAP, l1subcap);
> +       }
> +}
> +
>   static void rockchip_pcie_enable_l0s(struct dw_pcie *pci)
>   {
>          u32 cap, lnkcap;
> @@ -264,6 +296,7 @@ static int rockchip_pcie_host_init(struct dw_pcie_rp *pp)
>          irq_set_chained_handler_and_data(irq, rockchip_pcie_intx_handler,
>                                           rockchip);
> 
> +       rockchip_pcie_enable_l1sub(pci);
>          rockchip_pcie_enable_l0s(pci);
> 
>          return 0;
> @@ -301,6 +334,7 @@ static void rockchip_pcie_ep_init(struct dw_pcie_ep *ep)
>          struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>          enum pci_barno bar;
> 
> +       rockchip_pcie_enable_l1sub(pci);
>          rockchip_pcie_enable_l0s(pci);
>          rockchip_pcie_ep_hide_broken_ats_cap_rk3588(ep);
> 
> @@ -412,6 +446,8 @@ static int rockchip_pcie_resource_get(struct platform_device *pdev,
>                  return dev_err_probe(&pdev->dev, PTR_ERR(rockchip->rst),
>                                       "failed to get reset lines\n");
> 
> +       rockchip->supports_clkreq = of_property_read_bool(pdev->dev.of_node, "supports-clkreq");

Hi Shawn,

This line exceeds 80 characters. Can it be like this?

rockchip->supports_clkreq = of_property_read_bool(pdev->dev.of_node,
						  "supports-clkreq");

I have no doubts about the rest.

Reviewed-by: Hans Zhang <hans.zhang at cixtech.com>


Best regards,
Hans

> +
>          return 0;
>   }
> 
> --
> 2.7.4
> 
>