[PATCH v7 01/18] drm/display: bridge_connector: Ensure last bridge determines EDID/modes detection capabilities
Damon Ding
damon.ding at rock-chips.com
Mon Oct 20 19:31:13 PDT 2025
When multiple bridges are present, EDID detection capability
(DRM_BRIDGE_OP_EDID) takes precedence over modes detection
(DRM_BRIDGE_OP_MODES). To ensure the above two capabilities are
determined by the last bridge in the chain, we handle three cases:
Case 1: The later bridge declares only DRM_BRIDGE_OP_MODES
- If the previous bridge declares DRM_BRIDGE_OP_EDID, set
&drm_bridge_connector.bridge_edid to NULL and set
&drm_bridge_connector.bridge_modes to the later bridge.
- Ensure modes detection capability of the later bridge will not
be ignored.
Case 2: The later bridge declares only DRM_BRIDGE_OP_EDID
- If the previous bridge declares DRM_BRIDGE_OP_MODES, set
&drm_bridge_connector.bridge_modes to NULL and set
&drm_bridge_connector.bridge_edid to the later bridge.
- Although EDID detection capability has higher priority, this
operation is for balance and makes sense.
Case 3: the later bridge declares both of them
- Assign later bridge as &drm_bridge_connector.bridge_edid and
and &drm_bridge_connector.bridge_modes to this bridge.
- Just leave transfer of these two capabilities as before.
Signed-off-by: Damon Ding <damon.ding at rock-chips.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov at oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski at samsung.com>
---
Changes in v7:
- As Luca suggested, simplify the code and related comment.
---
drivers/gpu/drm/display/drm_bridge_connector.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/display/drm_bridge_connector.c b/drivers/gpu/drm/display/drm_bridge_connector.c
index baacd21e7341..7c2936d59517 100644
--- a/drivers/gpu/drm/display/drm_bridge_connector.c
+++ b/drivers/gpu/drm/display/drm_bridge_connector.c
@@ -673,14 +673,22 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
if (!bridge->ycbcr_420_allowed)
connector->ycbcr_420_allowed = false;
- if (bridge->ops & DRM_BRIDGE_OP_EDID)
- bridge_connector->bridge_edid = bridge;
+ /*
+ * Ensure the last bridge declares OP_EDID or OP_MODES or both.
+ */
+ if (bridge->ops & DRM_BRIDGE_OP_EDID || bridge->ops & DRM_BRIDGE_OP_MODES) {
+ bridge_connector->bridge_edid = NULL;
+ bridge_connector->bridge_modes = NULL;
+ if (bridge->ops & DRM_BRIDGE_OP_EDID)
+ bridge_connector->bridge_edid = bridge;
+ if (bridge->ops & DRM_BRIDGE_OP_MODES)
+ bridge_connector->bridge_modes = bridge;
+ }
if (bridge->ops & DRM_BRIDGE_OP_HPD)
bridge_connector->bridge_hpd = bridge;
if (bridge->ops & DRM_BRIDGE_OP_DETECT)
bridge_connector->bridge_detect = bridge;
- if (bridge->ops & DRM_BRIDGE_OP_MODES)
- bridge_connector->bridge_modes = bridge;
+
if (bridge->ops & DRM_BRIDGE_OP_HDMI) {
if (bridge_connector->bridge_hdmi)
return ERR_PTR(-EBUSY);
--
2.34.1
More information about the Linux-rockchip
mailing list