[PATCH 19/32] media: rj54n1cb0c: Use %pe format specifier

[Ricardo Ribalda]

The %pe format specifier is designed to print error pointers. It prints
a symbolic error name (eg. -EINVAL) and it makes the code simpler by
omitting PTR_ERR().

This patch fixes this cocci report:
./i2c/rj54n1cb0c.c:1361:4-11: WARNING: Consider using %pe to print PTR_ERR()
./i2c/rj54n1cb0c.c:1370:4-11: WARNING: Consider using %pe to print PTR_ERR()

Signed-off-by: Ricardo Ribalda <ribalda at chromium.org>
---
 drivers/media/i2c/rj54n1cb0c.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/rj54n1cb0c.c b/drivers/media/i2c/rj54n1cb0c.c
index 6dfc912168510fb1bd308f834911f9de705844b7..e95342d706c39a853e8c18de1ce447a5fa508565 100644
--- a/drivers/media/i2c/rj54n1cb0c.c
+++ b/drivers/media/i2c/rj54n1cb0c.c
@@ -1357,8 +1357,8 @@ static int rj54n1_probe(struct i2c_client *client)
 	rj54n1->pwup_gpio = gpiod_get_optional(&client->dev, "powerup",
 					       GPIOD_OUT_LOW);
 	if (IS_ERR(rj54n1->pwup_gpio)) {
-		dev_info(&client->dev, "Unable to get GPIO \"powerup\": %ld\n",
-			 PTR_ERR(rj54n1->pwup_gpio));
+		dev_info(&client->dev, "Unable to get GPIO \"powerup\": %pe\n",
+			 rj54n1->pwup_gpio);
 		ret = PTR_ERR(rj54n1->pwup_gpio);
 		goto err_clk_put;
 	}
@@ -1366,8 +1366,8 @@ static int rj54n1_probe(struct i2c_client *client)
 	rj54n1->enable_gpio = gpiod_get_optional(&client->dev, "enable",
 						 GPIOD_OUT_LOW);
 	if (IS_ERR(rj54n1->enable_gpio)) {
-		dev_info(&client->dev, "Unable to get GPIO \"enable\": %ld\n",
-			 PTR_ERR(rj54n1->enable_gpio));
+		dev_info(&client->dev, "Unable to get GPIO \"enable\": %pe\n",
+			 rj54n1->enable_gpio);
 		ret = PTR_ERR(rj54n1->enable_gpio);
 		goto err_gpio_put;
 	}

-- 
2.51.0.760.g7b8bcc2412-goog