[PATCH v2 1/5] dt-bindings: display: rk3588-dw-hdmi-qp: Add tmds-enable-gpios property

[Laurent Pinchart]

On Mon, Oct 06, 2025 at 02:19:24PM +0300, Dmitry Baryshkov wrote:
> On Mon, Oct 06, 2025 at 02:55:37AM +0300, Laurent Pinchart wrote:
> > From: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
> > 
> > Add an optional property to RK3588 HDMI TX Controller binding describing
> > a GPIO line to be asserted when operating in HDMI 1.4/2.0 TMDS mode and
> > deasserted for HDMI 2.1 FRL.
> > 
> > This is used to control an external level shifter for HDMI data lines.
> > 
> > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
> > Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > ---
> >  .../display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml   | 10 ++++++++++
> >  1 file changed, 10 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml
> > index 96b4b088eebe..eec0d40c91ea 100644
> > --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml
> > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml
> > @@ -113,6 +113,13 @@ properties:
> >      description:
> >        Additional HDMI QP related data is accessed through VO GRF regs.
> >  
> > +  tmds-enable-gpios:
> > +    description:
> > +      Optional GPIO line to be asserted when operating in HDMI 1.4/2.0
> > +      TMDS mode and deasserted for HDMI 2.1 FRL. It can be used to control
> > +      an external level shifter for HDMI data lines.
> > +    maxItems: 1
> 
> Just my 2c: since TMDS is assumed to be a default mode, shouldn't this
> be a frl-enable-gpios instead?

I don't mind either way. Cristian, any opinion ?

> > +
> >  required:
> >    - compatible
> >    - reg

-- 
Regards,

Laurent Pinchart