[PATCH] arm64: dts: rockchip: Enable i2c2 on Orange Pi 3B

[Jonas Karlman]

Hi Michael,

On 11/20/2025 8:00 PM, Michael Opdenacker wrote:
> Enable the "i2c2" bus on header pins 3 (I2C_SDA_M1)
> and 5 (I2C2_SCL_M1) of the Orange Pi 3B board.
> 
> As documented on http://www.orangepi.org/img/pi3b/0719-pi3b-19.png
> such pins are the only ones offering I2C functionality
> without conflicting with other SoC blocks.

This is strictly not true, these pins are by default used as GPIO, this
patch change them to use the I2C2 func, something that should normally
be enabled in an overlay.

Functions for these pins:

	func 0		func 1

	GPIO4_B4_d	I2C2_SDA_M1
	GPIO4_B5_d	I2C2_SCL_M1

> 
> Signed-off-by: Michael Opdenacker <michael.opdenacker at rootcommit.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi
> index d539570f531e..e2f0ccc6dbe7 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi
> @@ -435,6 +435,11 @@ regulator-state-mem {
>  	};
>  };
>  
> +&i2c2 {
> +	pinctrl-0 = <&i2c2m1_xfer>;

pinctrl-names should also be added here.

> +	status = "okay";

As mentioned above, this should be enabled in an DT overlay not in the
board DT.

Regards,
Jonas

> +};
> +
>  &i2s0_8ch {
>  	status = "okay";
>  };
> 
> ---
> base-commit: 8e621c9a337555c914cf1664605edfaa6f839774
> change-id: 20251120-orangepi3-enable-i2c2-fe6d25ec681a
> 
> Best regards,