[PATCH v2 RESEND 4/9] phy: mediatek: phy-mtk-hdmi-mt8195: convert from round_rate() to determine_rate()

[Louis-Alexis Eyraud]

Hi,

On Thu, 2025-11-06 at 18:25 -0500, Brian Masney wrote:
> The round_rate() clk ops is deprecated, so migrate this driver from
> round_rate() to determine_rate() using the Coccinelle semantic patch
> on the cover letter of this series.
> 
> Signed-off-by: Brian Masney <bmasney at redhat.com>
> ---
>  drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> index
> b38f3ae26b3f3d8c9e73b43d86510acf6cedb471..1426a2db984d53b91125b18f772
> 5738c44f19555 100644
> --- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> +++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> @@ -418,13 +418,13 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw
> *hw, unsigned long rate,
>  	return mtk_hdmi_pll_calc(hdmi_phy, hw, rate, parent_rate);
>  }
>  
> -static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long
> rate,
> -				    unsigned long *parent_rate)
> +static int mtk_hdmi_pll_determine_rate(struct clk_hw *hw,
> +				       struct clk_rate_request *req)
>  {
>  	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
>  
> -	hdmi_phy->pll_rate = rate;
> -	return rate;
> +	hdmi_phy->pll_rate = req->rate;
> +	return 0;
>  }
>  
>  static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
> @@ -439,7 +439,7 @@ static const struct clk_ops mtk_hdmi_pll_ops = {
>  	.prepare = mtk_hdmi_pll_prepare,
>  	.unprepare = mtk_hdmi_pll_unprepare,
>  	.set_rate = mtk_hdmi_pll_set_rate,
> -	.round_rate = mtk_hdmi_pll_round_rate,
> +	.determine_rate = mtk_hdmi_pll_determine_rate,
>  	.recalc_rate = mtk_hdmi_pll_recalc_rate,
>  };
>  
Tested OK on Mediatek Genio 510-EVK (MT8370) and Genio 1200-EVK
(MT8395) boards.

Tested-by: Louis-Alexis Eyraud <louisalexis.eyraud at collabora.com>

Regards,
Louis-Alexis