[PATCH v2] phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error

[Diederik de Haas]

Hi,

On Sun Apr 27, 2025 at 11:51 AM CEST, Algea Cao wrote:
> When using HDMI PLL frequency division coefficient at 50.25MHz
> that is calculated by rk_hdptx_phy_clk_pll_calc(), it fails to
> get PHY LANE lock. Although the calculated values are within the
> allowable range of PHY PLL configuration.
>
> In order to fix the PHY LANE lock error and provide the expected
> 50.25MHz output, manually compute the required PHY PLL frequency
> division coefficient and add it to ropll_tmds_cfg configuration
> table.
>
> Signed-off-by: Algea Cao <algea.cao at rock-chips.com>
> Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
>
> ---
>  drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
> index fe7c05748356..77236f012a1f 100644
> --- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
> +++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
> @@ -476,6 +476,8 @@ static const struct ropll_config ropll_tmds_cfg[] = {
>  	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
>  	{ 650000, 162, 162, 1, 1, 11, 1, 1, 1, 1, 1, 1, 1, 54, 0, 16, 4, 1,
>  	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
> +	{ 502500, 84, 84, 1, 1, 7, 1, 1, 1, 1, 1, 1, 1, 11, 1, 4, 5,
> +	  4, 11, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
>  	{ 337500, 0x70, 0x70, 1, 1, 0xf, 1, 1, 1, 1, 1, 1, 1, 0x2, 0, 0x01, 5,
>  	  1, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
>  	{ 400000, 100, 100, 1, 1, 11, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0,

I found this patch in the 'fixes' branch in linux-phy:
https://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git/commit/?h=fixes&id=f9475055b11c0c70979bd1667a76b2ebae638eb7

In the 'next' branch in linux-phy, I found this commit:
0edf9d2bb9b4 ("phy: rockchip: samsung-hdptx: Avoid Hz<->hHz unit conversion overhead")
https://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git/commit/?h=next&id=0edf9d2bb9b4ba7566dfdc7605883e04575129d9

Where the values in ropll_tmds_cfg are converted from hHz to Hz and the
data type changes from u32 to unsigned long long.
But AFAICT it does NOT convert this '502500' value, which IIUC means
most values are in Hz, while this one is in hHz.

Am I missing something or should this new value also be converted?

Cheers,
  Diederik
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20250516/82702c19/attachment-0001.sig>