[PATCH] arm64: dts: rockchip: Improve LED config for NanoPi R5S

[Heiko Stuebner]

On Tue, 13 May 2025 18:57:27 +0200, Diederik de Haas wrote:
> The NanoPi R5S has 4 GPIO LEDs, a RED one for SYStem power and 3 green
> LEDs meant to indicate that a cable is connected to either of the
> 2.5GbE LAN ports or the 1GbE WAN port.
> 
> In the NanoPi R5S schematic (2204; page 19) as well as on the PCB and on
> the case, SYS is used and not POWER. So replace 'power' with 'sys'.
> But keep the 'power_led' label/phandle even though the kernel doesn't
> use it, but it may be used outside of it.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: rockchip: Improve LED config for NanoPi R5S
      commit: 1631cbdb808963354ef6b6454bc617cd15f90718

Best regards,
-- 
Heiko Stuebner <heiko at sntech.de>