[PATCH V3 1/5] dt-bindings: mfd: ti,bq25703a: Add TI BQ25703A Charger
Krzysztof Kozlowski
krzk at kernel.org
Wed Jun 25 00:48:30 PDT 2025
On Mon, Jun 23, 2025 at 11:22:19AM -0500, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
>
> Document the Texas instruments BQ25703A series of charger managers/
> buck/boost regulators.
>
> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> ---
> .../devicetree/bindings/mfd/ti,bq25703a.yaml | 121 ++++++++++++++++++
> 1 file changed, 121 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/ti,bq25703a.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/ti,bq25703a.yaml b/Documentation/devicetree/bindings/mfd/ti,bq25703a.yaml
> new file mode 100644
> index 000000000000..0727f24b8e54
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/ti,bq25703a.yaml
> @@ -0,0 +1,121 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/ti,bq25703a.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: BQ25703A Charger Manager/Buck/Boost Converter
> +
> +maintainers:
> + - Chris Morgan <macromorgan at hotmail.com>
> +
> +allOf:
> + - $ref: /schemas/power/supply/power-supply.yaml#
> +
> +properties:
> + compatible:
> + const: ti,bq25703a
> +
> + reg:
> + const: 0x6b
> +
> + interrupts:
> + maxItems: 1
> +
> + power-supplies: true
Drop, redundant.
> +
> + monitored-battery:
> + description:
> + The phandle for a simple-battery connected to this gauge.
This part is redundant. It cannot be anything else, according to
power-supply.yaml
> + A minimum of constant-charge-current-max-microamp,
> + constant-charge-voltage-max-microvolt, and
> + voltage-min-design-microvolt are required.
This is fine.
> +
> + input-current-limit-microamp:
> + description:
> + Maximum total input current allowed used for both charging and
> + powering the device.
> + minimum: 50000
> + maximum: 6400000
> + default: 3250000
> +
> + regulators:
> + type: object
> + additionalProperties: false
> + description:
> + Boost converter regulator output of bq257xx.
> +
> + properties:
> + "usb-otg-vbus":
Drop quotes. Is this the name of regulator called in datasheet? To which
pin this corresponds to? I cannot find anything on usb-otg or usb_otg.
> + type: object
> + $ref: /schemas/regulator/regulator.yaml
> +
> + properties:
> + regulator-name: true
> + regulator-min-microamp:
> + minimum: 0
> + maximum: 6350000
> + regulator-max-microamp:
> + minimum: 0
> + maximum: 6350000
> + regulator-min-microvolt:
> + minimum: 4480000
> + maximum: 20800000
> + regulator-max-microvolt:
> + minimum: 4480000
> + maximum: 20800000
> + enable-gpios:
> + description:
> + The BQ25703 may require both a register write and a GPIO
> + toggle to enable the boost regulator.
> +
> + additionalProperties: false
Please place it after $ref.
> +
> + required:
> + - regulator-name
> + - regulator-min-microamp
> + - regulator-max-microamp
> + - regulator-min-microvolt
> + - regulator-max-microvolt
> +
> +unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - input-current-limit-microamp
> + - monitored-battery
> + - power-supplies
Keep the same order as in properties.
Best regards,
Krzysztof
More information about the Linux-rockchip
mailing list