[PATCH v4 0/3] Add Radxa CM5 module and IO board dts

[Joseph Kogut]

This patch series adds initial device tree support for the Radxa CM5 SoM
and accompanying IO board.

For the latest revision, we noticed that the USB-C port wasn't working
properly on boot until an external power source was connected. This was
tracked down to try-power-role being incorrectly set to source instead
of sink. Setting it to sink also matches with the vendor kernel
configuration, and fixes USB-C.

V3 -> V4:
  - Fixed XHCI initialization bug by changing try-power-role from source
    to sink

V2 -> V3:
  - Addressed YAML syntax error in dt binding (per Rob)
  - Fixed whitespace issue in dts reported by checkpatch.pl
  - Split base SoM and carrier board into separate patches
  - Added further details about the SoM and carrier to the commit
    messages

V1 -> V2:
  - Added copyright header and data sheet links
  - Removed non-existent property
  - Sorted alphabetically
  - Removed errant whitespace
  - Moved status to the end of each node
  - Removed pinctrl-names property from leds (indicated by CHECK_DTBS)
  - Removed delays from gmac with internal delay

Signed-off-by: Joseph Kogut <joseph.kogut at gmail.com>
---
Joseph Kogut (3):
      dt-bindings: arm: rockchip: Add Radxa CM5 IO board
      arm64: dts: rockchip: Add rk3588 based Radxa CM5
      arm64: dts: rockchip: Add support for CM5 IO carrier

 .../devicetree/bindings/arm/rockchip.yaml          |   7 +
 arch/arm64/boot/dts/rockchip/Makefile              |   1 +
 .../boot/dts/rockchip/rk3588s-radxa-cm5-io.dts     | 454 +++++++++++++++++++++
 .../arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi | 156 +++++++
 4 files changed, 618 insertions(+)
---
base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8
change-id: 20250605-rk3588s-cm5-io-dts-upstream-f4d1e853977e

Best regards,
-- 
Joseph Kogut <joseph.kogut at gmail.com>