[PATCH 2/4] arm64: dts: rockchip: enable USB A ports on ArmSoM Sige5

[Alexey Charkov]

On Tue, Jun 3, 2025 at 9:51 PM Nicolas Frattaroli
<nicolas.frattaroli at collabora.com> wrote:
>
> On Tuesday, 3 June 2025 19:01:14 Central European Summer Time Alexey Charkov wrote:
> > Enable the two USB type A ports (USB2 and USB3) present on the ArmSoM
> > Sige5 board.
> >
> > Both ports use just one xHCI controller, with the USB 2.0 signals fed
> > off the same USB OTG PHY through an onboard hub. VBUS of both ports is
> > controlled by the same GPIO regulator (VCC_USBHOST in the schematics,
> > toggled by GPIO4 RK_PA6).
> >
> > Signed-off-by: Alexey Charkov <alchark at gmail.com>
> > ---
> >  .../boot/dts/rockchip/rk3576-armsom-sige5.dts      | 38 ++++++++++++++++++++++
> >  1 file changed, 38 insertions(+)
> >
>
> This is already done here:
>
> https://lore.kernel.org/linux-rockchip/20250507-rk3576-sige5-usb-v3-4-89bf5a614ccf@collabora.com/

Oh cool! Sorry I missed that one. Your series is much more
comprehensive, so this patch of mine can be dropped. Thanks for your
work!

Would you mind chiming in on the other patches here, given your
knowledge of the hardware?

By the way, you guys don't seem to carry those patches of yours in the
Collabora tree [1]? Nor the TSADC updates as far as I can tell.

[1] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux/-/blob/rockchip-release/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts?ref_type=heads

Best regards,
Alexey