[PATCH] arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts

Dragan Simic dsimic at manjaro.org
Sun Jan 19 01:54:26 PST 2025


Hello Tianling,

Thanks for the patch.  Please, see a comment below.

On 2025-01-19 10:11, Tianling Shen wrote:
> In general the delay should be added by the PHY instead of the MAC,
> and this improves network stability on some boards which seem to
> need different delay.
> 
> Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 
> Plus LTS")
> Cc: stable at vger.kernel.org # 6.6+
> Signed-off-by: Tianling Shen <cnsztl at gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 3 +--
>  arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts     | 1 +
>  arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi    | 1 -
>  3 files changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git
> a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
> b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
> index 67c246ad8b8c..ec2ce894da1f 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
> @@ -17,8 +17,7 @@ / {
> 
>  &gmac2io {
>  	phy-handle = <&yt8531c>;
> -	tx_delay = <0x19>;
> -	rx_delay = <0x05>;
> +	phy-mode = "rgmii-id";

Shouldn't the "tx_delay" and "rx_delay" DT parameters be converted
into the "tx-internal-delay-ps" and "rx-internal-delay-ps" parameters,
respectively, so the Motorcomm PHY driver can pick them up and
actually configure the internal PHY delays?

>  	status = "okay";
> 
>  	mdio {
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
> b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
> index 324a8e951f7e..846b931e16d2 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
> @@ -15,6 +15,7 @@ / {
> 
>  &gmac2io {
>  	phy-handle = <&rtl8211e>;
> +	phy-mode = "rgmii";
>  	tx_delay = <0x24>;
>  	rx_delay = <0x18>;
>  	status = "okay";
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi
> index 4f193704e5dc..09508e324a28 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dtsi
> @@ -109,7 +109,6 @@ &gmac2io {
>  	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
>  	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
>  	clock_in_out = "input";
> -	phy-mode = "rgmii";
>  	phy-supply = <&vcc_io>;
>  	pinctrl-0 = <&rgmiim1_pins>;
>  	pinctrl-names = "default";



More information about the Linux-rockchip mailing list