[RFC PATCH v1 0/6] rockchip: add a functional usb3 phy driver for rk3328

[Peter Geis]

On Sat, Jan 18, 2025 at 4:08 AM Krzysztof Kozlowski <krzk at kernel.org> wrote:
>
> On 15/01/2025 02:26, Peter Geis wrote:
> >
> > This is my newly reworked phy driver for the rk3328 usb3 phy. It is
> > based loosely on my original version, but as of now almost nothing of
> > the original driver remains. The main fix here is the discovery of
> > BIT(6) in the interrupt enable grf register fixes the usb3 disconnection
> > detection (mostly). On occasion an unpopulated usb3 hub will take
> > several seconds to disconnect. However this means all of the hack around
> > work to reset the usb core manually is no longer required.
> >
> BTW, RFC for some maintainers means "do not review, work-in-progress".
> For some means "review, but low priority" or "review, but for sure I
> have bugs here". I usually review and then someone responds: "it is not
> for review, it is just RFC", so to avoid my wasted time please always
> mention in cover letter why this is RFC. What do you expect here or why
> this is not ready for review as normal patch.

Thank you, that makes sense. I marked it as RFC as I'm aware it isn't
a perfect solution and there's a lot of undefined values. What I was
looking for here was:
- Review for code quality, so if I'm completely off track I can get to
work fixing it. (Thank you so far)
- Sanity testing from others struggling with the issues it fixes.
- Feedback from USB engineers about the issues remaining.
- Hopefully someone with access to the IP can provide insight into the
magic registers.

>
> Best regards,
> Krzysztof