[PATCH 2/2] phy: rockchip: usbdp: re-init the phy on orientation-change

[Heiko Stübner]

Am Dienstag, 25. Februar 2025, 19:45:19 MEZ schrieb Heiko Stuebner:
> diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
> index 7b17c82ebcfc..b63259a90d85 100644
> --- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
> +++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
> @@ -1277,6 +1277,7 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
>  				 enum typec_orientation orien)
>  {
>  	struct rk_udphy *udphy = typec_switch_get_drvdata(sw);
> +	int ret = 0;
>  
>  	mutex_lock(&udphy->mutex);
>  
> @@ -1292,6 +1293,12 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
>  	rk_udphy_set_typec_default_mapping(udphy);
>  	rk_udphy_usb_bvalid_enable(udphy, true);
>  
> +	/* re-init the phy if already on */
> +	if (udphy->status != UDPHY_MODE_NONE) {
> +		rk_udphy_disable(udphy);
> +		ret = rk_udphy_setup(udphy);
> +	}
> +

just realized that 

	if (udphy->status != UDPHY_MODE_NONE)
		ret = rk_udphy_init(udphy);

does the same, and we really don't need to disable and re-enable the
phy's clocks that are the added via rk_udphy_disable and _setup.

So will give it a day and send a v2 then.


Heiko