[PATCH v6 1/2] dt-bindings: PCI: dw: rockchip: Add rk3576 support
Kever Yang
kever.yang at rock-chips.com
Tue Feb 25 00:38:54 PST 2025
Hi Krzysztof,
Thanks for your review.
On 2025/2/24 17:28, Krzysztof Kozlowski wrote:
> On Mon, Feb 24, 2025 at 03:49:27PM +0800, Kever Yang wrote:
>> rk3576 is using DWC PCIe controller, with msi interrupt directly to GIC
>> instead of using GIC ITS, so
>> - no ITS support is required and the 'msi-map' is not required,
>> - a new 'msi' interrupt is needed.
>>
>> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
>> Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
>> ---
>>
>> Changes in v6:
>> - Fix make dt_binding_check and make CHECK_DTBS=y
>>
>> Changes in v5:
>> - Add constraints per device for interrupt-names due to the interrupt is
>> different from rk3588.
>>
>> Changes in v4:
>> - Fix wrong indentation in dt_binding_check report by Rob
>>
>> Changes in v3:
>> - Fix dtb check broken on rk3588
>> - Update commit message
>>
>> Changes in v2:
>> - remove required 'msi-map'
>> - add interrupt name 'msi'
>>
>> .../bindings/pci/rockchip-dw-pcie-common.yaml | 41 ++++++++++++++++++-
>> .../bindings/pci/rockchip-dw-pcie.yaml | 19 ++++++---
>> 2 files changed, 52 insertions(+), 8 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml
>> index cc9adfc7611c..e1ca8e2f35fe 100644
>> --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml
>> +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml
>> @@ -65,7 +65,11 @@ properties:
>> tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx,
>> nf_err_rx, f_err_rx, radm_qoverflow
>> - description:
>> - eDMA write channel 0 interrupt
>> + If the matching interrupt name is "msi", then this is the combinded
>> + MSI line interrupt, which is to support MSI interrupts output to GIC
>> + controller via GIC SPI interrupt instead of GIC its interrupt.
>> + If the matching interrupt name is "dma0", then this is the eDMA write
>> + channel 0 interrupt.
>> - description:
>> eDMA write channel 1 interrupt
>> - description:
>> @@ -81,7 +85,9 @@ properties:
>> - const: msg
>> - const: legacy
>> - const: err
>> - - const: dma0
>> + - enum:
>> + - msi
>> + - dma0
>> - const: dma1
>> - const: dma2
>> - const: dma3
>> @@ -123,4 +129,35 @@ required:
>>
>> additionalProperties: true
>>
>> +anyOf:
> There is never syntax like that. Where did you find it (so we can fix
> it)?
>
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: rockchip,rk3576-pcie
> This does not belong to common schema, but to device specific. I don't
> see this compatible in this common schema at all.
The common schema covers rockchip-dw-pcie.yaml and rockchip-dw-pcie-ep.yaml,
so I though I should add the if condition here.
>
>> + then:
>> + properties:
> interrupts:
> minItems: 6
> maxItems: 6
Will add this back.
Thanks,
- Kever
>> + interrupt-names:
>> + items:
>> + - const: sys
>> + - const: pmc
>> + - const: msg
>> + - const: legacy
>> + - const: err
> Best regards,
> Krzysztof
>
>
More information about the Linux-rockchip
mailing list