[PATCH v5 2/3] arm64: dts: rockchip: Add rk3588 based Radxa CM5

[FUKAUMI Naoki]

Hi Joseph,

First of all, thank you very much for your hard work!

On 6/18/25 07:12, Joseph Kogut wrote:
> Add initial support for the Radxa Compute Module 5 (CM5). The CM5 uses a
> proprietary connector.
> 
> Specification:
> - Rockchip RK3588
> - Up to 32 GB LPDDR4X
> - Up to 128 GB eMMC
> - 1x HDMI TX up to 8k at 60 hz
> - 1x eDP TX up to 4k at 60 hz
> - Gigabit Ethernet PHY
> 
> Signed-off-by: Joseph Kogut <joseph.kogut at gmail.com>
> ---
>   .../arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi | 135 +++++++++++++++++++++
>   1 file changed, 135 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..6410ea5255dc783e5d24677853ccf1c78008e834
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2025 Joseph Kogut <joseph.kogut at gmail.com>
> + */
> +
> +/*
> + * CM5 data sheet
> + * https://dl.radxa.com/cm5/v2210/radxa_cm5_v2210_schematic.pdf
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> +#include <dt-bindings/usb/pd.h>
> +
> +/ {
> +	compatible = "radxa,cm5", "rockchip,rk3588s";
> +
> +	aliases {
> +		mmc0 = &sdhci;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led_sys: led-0 {
> +			color = <LED_COLOR_ID_BLUE>;
> +			default-state = "on";
> +			function = LED_FUNCTION_HEARTBEAT;
> +			gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +};
> +
> +&cpu_b0 {
> +	cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b1 {
> +	cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b2 {
> +	cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_b3 {
> +	cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_l0 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l1 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l2 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l3 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&gpu {
> +	mali-supply = <&vdd_gpu_s0>;
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0m2_xfer>;
> +	status = "okay";
> +
> +	vdd_cpu_big0_s0: regulator at 42 {
> +		compatible = "rockchip,rk8602";
> +		reg = <0x42>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_cpu_big0_s0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <1050000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +
> +	vdd_cpu_big1_s0: regulator at 43 {
> +		compatible = "rockchip,rk8602";
> +		reg = <0x43>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_cpu_big1_s0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <1050000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +};
> +
> +&mdio1 {
> +	rgmii_phy1: phy at 1 {
> +		compatible = "ethernet-phy-ieee802.3-c22";
> +		reg = <0x1>;
> +	};
> +};
> +
> +&pd_gpu {
> +	domain-supply = <&vdd_gpu_s0>;
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	no-sdio;
> +	no-sd;
> +	non-removable;
> +	max-frequency = <200000000>;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	mmc-hs200-1_8v;
> +	status = "okay";
> +};
> +

Please remove the last blank line.

Best regards,

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.