[PATCH v6 13/13] arm64: dts: rockchip: enable vicap dvp on wolfvision pf5 io expander

[Michael Riesch via B4 Relay]

From: Michael Riesch <michael.riesch at wolfvision.net>

The Digital Video Port (DVP, the 16-bit variant) of the RK3568 VICAP
is broken out to the PF5 mainboard expansion header.
Enable it in the device tree overlay for the WolfVision PF5 IO
Expander board.

Signed-off-by: Michael Riesch <michael.riesch at wolfvision.net>
Signed-off-by: Michael Riesch <michael.riesch at collabora.com>
---
 .../rockchip/rk3568-wolfvision-pf5-io-expander.dtso  | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso b/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso
index 048933de2943..8cfce71dd318 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso
+++ b/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso
@@ -11,6 +11,7 @@
 #include <dt-bindings/clock/rk3568-cru.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/media/video-interfaces.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 
 &{/} {
@@ -134,3 +135,22 @@ &usb2phy0_host {
 	phy-supply = <&usb_host_vbus>;
 	status = "okay";
 };
+
+&vicap {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cif_clk &cif_dvp_clk &cif_dvp_bus16>;
+	status = "okay";
+};
+
+&vicap_dvp {
+	vicap_dvp_input: endpoint {
+		bus-type = <MEDIA_BUS_TYPE_BT656>;
+		bus-width = <16>;
+		pclk-sample = <MEDIA_PCLK_SAMPLE_DUAL_EDGE>;
+		rockchip,dvp-clk-delay = <10>;
+	};
+};
+
+&vicap_mmu {
+	status = "okay";
+};

-- 
2.39.5