[PATCH v2] phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error

[Algea Cao]

When using HDMI PLL frequency division coefficient at 50.25MHz
that is calculated by rk_hdptx_phy_clk_pll_calc(), it fails to
get PHY LANE lock. Although the calculated values are within the
allowable range of PHY PLL configuration.

In order to fix the PHY LANE lock error and provide the expected
50.25MHz output, manually compute the required PHY PLL frequency
division coefficient and add it to ropll_tmds_cfg configuration
table.

Signed-off-by: Algea Cao <algea.cao at rock-chips.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>

---

Changes in v2:
- Modify some descriptions in commit message.
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index fe7c05748356..77236f012a1f 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -476,6 +476,8 @@ static const struct ropll_config ropll_tmds_cfg[] = {
 	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
 	{ 650000, 162, 162, 1, 1, 11, 1, 1, 1, 1, 1, 1, 1, 54, 0, 16, 4, 1,
 	  1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
+	{ 502500, 84, 84, 1, 1, 7, 1, 1, 1, 1, 1, 1, 1, 11, 1, 4, 5,
+	  4, 11, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
 	{ 337500, 0x70, 0x70, 1, 1, 0xf, 1, 1, 1, 1, 1, 1, 1, 0x2, 0, 0x01, 5,
 	  1, 1, 1, 0, 0x20, 0x0c, 1, 0x0e, 0, 0, },
 	{ 400000, 100, 100, 1, 1, 11, 1, 1, 0, 1, 0, 1, 1, 0x9, 0, 0x05, 0,
-- 
2.43.0