[PATCH v2 03/14] arm64: dts: rockchip: Fix bluetooth properties on rk3566 box demo

[Dragan Simic]

Hello Heiko,

On 2024-10-08 22:39, Heiko Stuebner wrote:
> The expected clock-name is different, and extclk also is deprecated
> in favor of txco for clocks that are not crystals.
> 
> The wakeup gpio properties are named differently too, when changing
> from vendor-tree to mainline. So fix those to match the binding.
> 
> Fixes: 2e0537b16b25 ("arm64: dts: rockchip: Add dts for rockchip
> rk3566 box demo board")
> Cc: Andy Yan <andyshrk at 163.com>
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>

Looking good to me, thanks for the patch.  I've got these changes
cross-referenced to what's expected in drivers/bluetooth/hci_bcm.c,
and it's all fine.

Reviewed-by: Dragan Simic <dsimic at manjaro.org>

> ---
>  arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> index 0c18406e4c59..7d4680933823 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> @@ -449,9 +449,9 @@ &uart1 {
>  	bluetooth {
>  		compatible = "brcm,bcm43438-bt";
>  		clocks = <&pmucru CLK_RTC_32K>;
> -		clock-names = "ext_clock";
> -		device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
> -		host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
> +		clock-names = "txco";
> +		device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
> +		host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
>  		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;