[PATCH] mtd: rawnand: rockchip: reject NVDDR timings when checked

Val Packett val at packett.cool
Fri May 17 20:31:13 PDT 2024


.setup_interface first gets called with a negative "target" value
NAND_DATA_IFACE_CHECK_ONLY, in which case an error is expected
if the controller driver does not support the timing mode (NVDDR).

Signed-off-by: Val Packett <val at packett.cool>
---
Hello everyone, first Linux patch from a long time FreeBSD person :)

This was required to get the NAND controller to attach on the random
old RK3066 tablet I'm bringing up mainline on.
---
 drivers/mtd/nand/raw/rockchip-nand-controller.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/rockchip-nand-controller.c b/drivers/mtd/nand/raw/rockchip-nand-controller.c
index 7baaef69d..555804476 100644
--- a/drivers/mtd/nand/raw/rockchip-nand-controller.c
+++ b/drivers/mtd/nand/raw/rockchip-nand-controller.c
@@ -420,13 +420,13 @@ static int rk_nfc_setup_interface(struct nand_chip *chip, int target,
 	u32 rate, tc2rw, trwpw, trw2c;
 	u32 temp;
 
-	if (target < 0)
-		return 0;
-
 	timings = nand_get_sdr_timings(conf);
 	if (IS_ERR(timings))
 		return -EOPNOTSUPP;
 
+	if (target < 0)
+		return 0;
+
 	if (IS_ERR(nfc->nfc_clk))
 		rate = clk_get_rate(nfc->ahb_clk);
 	else
-- 
2.45.0




More information about the Linux-rockchip mailing list