[PATCH 06/14] drm/bridge: analogix_dp: remove clk handling from analogix_dp_set_bridge

Lucas Stach l.stach at pengutronix.de
Fri May 3 08:11:21 PDT 2024


The clock is already managed by runtime PM, which is properly invoked
from the analogix_dp_set_bridge function, so there is no need for an
additional reference.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 9f1dfa6f2175..311e1e67486d 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1258,12 +1258,6 @@ static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
 
 	pm_runtime_get_sync(dp->dev);
 
-	ret = clk_prepare_enable(dp->clock);
-	if (ret < 0) {
-		DRM_ERROR("Failed to prepare_enable the clock clk [%d]\n", ret);
-		goto out_dp_clk_pre;
-	}
-
 	if (dp->plat_data->power_on)
 		dp->plat_data->power_on(dp->plat_data);
 
@@ -1297,8 +1291,7 @@ static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
 	phy_power_off(dp->phy);
 	if (dp->plat_data->power_off)
 		dp->plat_data->power_off(dp->plat_data);
-	clk_disable_unprepare(dp->clock);
-out_dp_clk_pre:
+
 	pm_runtime_put_sync(dp->dev);
 
 	return ret;
@@ -1367,8 +1360,6 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
 	analogix_dp_set_analog_power_down(dp, POWER_ALL, 1);
 	phy_power_off(dp->phy);
 
-	clk_disable_unprepare(dp->clock);
-
 	pm_runtime_put_sync(dp->dev);
 
 	ret = analogix_dp_prepare_panel(dp, false, true);
-- 
2.39.2




More information about the Linux-rockchip mailing list