[PATCH v4 0/5] Add RK816 PMIC support

[Alex Bee]

Hi Lee,

it looks like all patches except the MFD ones have been reviewed/acked by
now. I hope I integrated your feedback to v3 [0] in a way you were
expecting. Also I was hoping this whole series could be go though the MFD
tree, since all the none-MFD patches depend on the changes mfd-header.

Please let me know if there is anything left for me to do.

Thanks,

Alex

[0] 
https://lore.kernel.org/lkml/20240323132757.141861-2-knaerzche@gmail.com/T/#m1bb23196c192289f898aebc64ccf62edb9ef5b5a

Am 16.04.24 um 18:12 schrieb Alex Bee:
> This series aims to add support for Rockchip RK816 PMIC series. As per
> datasheet it's targeted for RK3126/RK3128 (RK816-1), RK1108 (RK816-2) and
> PX3-SE (RK816-3) but might be used for other SoCs as well. The MFD consists
> of an integrated RTC, a GPIO controller, two 32k clock outputs, a power
> key, 3 buck- and 6 ldo regulators, 3 regulator-switches, and charger with
> integrated fuel gauge. Charger and fuel gauge are not part of this series.
> Two of the switches (otg/boost) are part of the binding, but not of
> the driver. They must only ever be enabled if no battery charging is
> happening, but it will be enabled automatically if a battery is attached
> and an external power source is connected. Thus that needs some
> incorporation of a yet to be added charger driver.
> Integration in the existing rk8xx-infrastructure was pretty straightforward
> and only needed very little tweaking. In order to not further bloat the
> driver(s) too much with additional `#define`s I tried to re-use existing
> ones wherever possible.
>
> The patches are loosely based on the vendor's implementation, verified
> against the datasheet and tested/measured on a RK3126 board.
>
> I'd like to gently ping pinctrl and regulator maintainers: please have a
> look at this series. I've now added Sebastian Reichel to the recipients, as
> he recently added RK806 support and re-worked parts of the rk8xx drivers.
>
> changes since v1:
>    - integrated Krzysztof's feedback for the bindings and the resulting
>      driver changes
>    - fixed a sparse warning
>
> link to v1:
> https://lore.kernel.org/lkml/20240321143911.90210-2-knaerzche@gmail.com/
>
> changes since v2:
>    - integrated Krzysztof's feedback to v2 of the bindings and the resulting
>      driver changes
>
> link to v2:
> https://lore.kernel.org/lkml/20240323085852.116756-1-knaerzche@gmail.com/
>
> changes since v3:
>    - integrated Krzysztof's feedback to the bindings of v3
>    - integrated Lee's feedback to the mfd part of v3
>
> link to v3:
> https://lore.kernel.org/lkml/20240323132757.141861-2-knaerzche@gmail.com/
>
> Please see individual patches for details about the changes.
>
> Alex Bee (5):--
>    dt-bindings: mfd: Add rk816 binding
>    mfd: rk8xx: Add RK816 support
>    pinctrl: rk805: Add rk816 pinctrl support
>    regulator: rk808: Support apply_bit for
>      rk808_set_suspend_voltage_range
>    regulator: rk808: Add RK816 support
>
>   .../bindings/mfd/rockchip,rk816.yaml          | 274 ++++++++++++++++++
>   drivers/mfd/Kconfig                           |   4 +-
>   drivers/mfd/rk8xx-core.c                      | 104 +++++++
>   drivers/mfd/rk8xx-i2c.c                       |  45 ++-
>   drivers/pinctrl/pinctrl-rk805.c               |  69 +++++
>   drivers/regulator/rk808-regulator.c           | 218 +++++++++++++-
>   include/linux/mfd/rk808.h                     | 144 +++++++++
>   7 files changed, 851 insertions(+), 7 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk816.yaml
>