[PATCH 1/2] arm64: dts: rockchip: Add enable-strobe-pulldown to emmc phy on ROCK Pi 4

[Dragan Simic]

On 2024-03-27 20:26, Folker Schwesinger wrote:
> Commit 8b5c2b45b8f0 disabled the internal pull-down for the strobe line
> causing I/O errors in HS400 mode for various eMMC modules.
> 
> Enable the internal strobe pull-down for ROCK Pi 4 boards. Also 
> re-enable
> HS400 mode, that was replaced with HS200 mode as a workaround for the
> stability issues in:
> cee572756aa2 ("arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 
> 4").
> 
> This was tested on ROCK 4SE and ROCK Pi 4B+.
> 
> Fixes: 8b5c2b45b8f0 ("phy: rockchip: set pulldown for strobe line in 
> dts")
> Signed-off-by: Folker Schwesinger <dev at folker-schwesinger.de>

Looking good to me.

Reviewed-by: Dragan Simic <dsimic at manjaro.org>

> ---
>  arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
> index 281a12180703..b9d6284bb804 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
> @@ -194,6 +194,7 @@ &cpu_b1 {
>  };
> 
>  &emmc_phy {
> +	rockchip,enable-strobe-pulldown;
>  	status = "okay";
>  };
> 
> @@ -648,7 +649,8 @@ &saradc {
>  &sdhci {
>  	max-frequency = <150000000>;
>  	bus-width = <8>;
> -	mmc-hs200-1_8v;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
>  	non-removable;
>  	status = "okay";
>  };