[PATCH] arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f

Heiko Stuebner heiko at sntech.de
Sun Mar 24 15:38:52 PDT 2024


On Thu, 14 Mar 2024 15:24:35 +0300, Arınç ÜNAL wrote:
> The MT7531 switch listens on PHY address 0x1f on an MDIO bus. I've got two
> findings that support this. There's no bootstrapping option to change the
> PHY address of the switch. The Linux driver hardcodes 0x1f as the PHY
> address of the switch. So the reg property on the device tree is currently
> ignored by the Linux driver.
> 
> Therefore, describe the correct PHY address on Banana Pi BPI-R2 Pro that
> has this switch.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f
      commit: a2ac2a1b02590a22a236c43c455f421cdede45f5

Best regards,
-- 
Heiko Stuebner <heiko at sntech.de>



More information about the Linux-rockchip mailing list