[PATCH] arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f

[Arınç ÜNAL via B4 Relay]

From: Arınç ÜNAL <arinc.unal at arinc9.com>

The MT7531 switch listens on PHY address 0x1f on an MDIO bus. I've got two
findings that support this. There's no bootstrapping option to change the
PHY address of the switch. The Linux driver hardcodes 0x1f as the PHY
address of the switch. So the reg property on the device tree is currently
ignored by the Linux driver.

Therefore, describe the correct PHY address on Banana Pi BPI-R2 Pro that
has this switch.

Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
---
 arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 7b5f3904ef61..03d6d920446a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -525,9 +525,9 @@ &mdio0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	switch at 0 {
+	switch at 1f {
 		compatible = "mediatek,mt7531";
-		reg = <0>;
+		reg = <0x1f>;
 
 		ports {
 			#address-cells = <1>;

---
base-commit: 0276d797531ea2d1865a04fbe54c659608f5788f
change-id: 20240314-for-rockchip-mt7531-phy-address-ba6c2fff485f

Best regards,
-- 
Arınç ÜNAL <arinc.unal at arinc9.com>