[PATCH v2] arm64: dts: rockchip: qnap-ts433: Fix name for UART pin header

Uwe Kleine-König ukleinek at debian.org
Fri Mar 1 08:32:00 PST 2024


I typoed the pin header name when copying it from my notes on paper.

Fixes: 9da1c0327d58 ("arm64: dts: rockchip: Add basic support for QNAP TS-433")
Signed-off-by: Uwe Kleine-König <ukleinek at debian.org>
---
Hello,

only change is that I fixed the Sob line to match the sender.

Best regards
Uwe

 arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index 2908486bc924..6a998166003c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -76,7 +76,7 @@ &sdhci {
 };
 
 /*
- * Pins available on CN2 connector at TTL voltage level (3V3).
+ * Pins available on CN3 connector at TTL voltage level (3V3).
  * ,_  _.
  * |1234|  1=TX 2=VCC
  * `----'  3=RX 4=GND

base-commit: 1870cdc0e8dee32e3c221704a2977898ba4c10e8
-- 
2.43.0




More information about the Linux-rockchip mailing list