[PATCH v3 4/5] wifi: brcmfmac: Add optional lpo clock enable support

Arend Van Spriel arend.vanspriel at broadcom.com
Sun Jun 30 03:51:44 PDT 2024


On June 30, 2024 11:54:43 AM Stefan Wahren <wahrenst at gmx.net> wrote:

> Am 30.06.24 um 11:15 schrieb Chen-Yu Tsai:
>> On Sun, Jun 30, 2024 at 5:10 PM Jacobe Zang <jacobe.zang at wesion.com> wrote:
>>> Hi Stefan,
>>>
>>>>> WiFi modules often require 32kHz clock to function. Add support to
>>>>> enable the clock to PCIe driver.
>>>> the low power clock is independent from the host interface like PCIe. So
>>>> the clock handling should move to the common code. Sorry, not i cannot
>>>> give a good suggestion, what's the best place for this.
>>> I think the clock is used by the PCIe device so enable it in this file. 
>>> Also I checked
>>> use of clock which in spi[0] or sdio[0] device was enabled similarly to this.
>>>
>>> [0] 
>>> https://lore.kernel.org/all/20210806081229.721731-4-claudiu.beznea@microchip.com/
>> You're looking at the wrong driver. For brcmfmac, the lpo clock is toggled
>> by the MMC pwrseq code. And for the Bluetooth side (where it really matters)
>> for UARTs, it is in drivers/bluetooth/hci_bcm.c. and documented in the
>> binding Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
> Thanks for clarifying. So this change handles the PCIe case without
> bluetooth. For USB the clock control doesn't make sense.
>
> Sorry for the noise

So someone could end up with both wifi and bt LPO clock defined in DTS 
file. Not sure if that can be expressed and validated in device tree, but 
at the least there should be a fair warning in both binding files that 
there can be only one!

The LPO clock matters to the chip. It is not specific to the BT part. The 
clock is important for the power-up cycle. The timing difference WL_REG_ON 
and BT_REG_ON is expressed in LPO clock cycles.

Regards,
Arend



-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4219 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20240630/ae47c25c/attachment.p7s>


More information about the Linux-rockchip mailing list