[PATCH v4 0/9] Add Mule MFD support

[Farouk Bouabid]

Hi Guenter,

On 28.06.24 02:05, Guenter Roeck wrote:
> On 6/24/24 09:13, Farouk Bouabid wrote:
>> Hi Guenter,
>>
>> On 19.06.24 15:31, Guenter Roeck wrote:
>>> On 6/19/24 00:45, Farouk Bouabid wrote:


[...]


>
>> If we cannot proceed with that then we could add a compatible to the 
>> amc6821 driver to add the mux device (Basically the "tsd,mule" 
>> compatible in amc6821 compatible list would be a combo driver with 
>> mux logic + amc6821). Do you think that is more appropriate ?
>>
>
> Implement the mux as part of the amc6821 driver ? No. We could discuss
> instantiating the i2c mux driver from the amc6821 driver.


If I understand correctly we would have the amc6821 for "tsd,mule" 
compatible probe the mule-i2c-mux as platform_device. Possible DT 
representation would be something like:


i2c {
     #address-cells = <1>;
     #size-cells = <0>;

     fan at 18 {
         compatible = "tsd,mule", "ti,amc6821";
         reg = <0x18>;

         i2c-mux {
             compatible = "tsd,mule-i2c-mux";
             #address-cells = <1>;
             #size-cells = <0>;

             i2c at 0 {
                 reg = <0x0>;
                 #address-cells = <1>;
                 #size-cells = <0>;

                 rtc at 6f {
                     compatible = "isil,isl1208";
                     reg = <0x6f>;
                 };

             };
         };
     };
};


Cheers,

Farouk