[PATCH v4 1/2] arm64: dts: rockchip: Add USB-C to Khadas Edge 2

[Heiko Stübner]

Am Dienstag, 25. Juni 2024, 09:53:45 CEST schrieb Jacobe Zang:
> > Was it disabled anywhere?
> 
> This patch aims to enable the DRD function of Type-C port. So need to enable in DTS.

> +       usbc0: usb-typec at 22 {
> +               compatible = "fcs,fusb302";
> +               reg = <0x22>;
> +               interrupt-parent = <&gpio1>;
> +               interrupts = <RK_PB5 IRQ_TYPE_LEVEL_LOW>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&usbc0_int>;
> +               vbus-supply = <&vbus5v0_typec>;
> +               status = "okay";

what Krzysztof means, is that the default for status is "okay". So for a
node you just added, you don't need a separate status="okay"

This is only needed if the node is added in a base dtsi (like soc
peripherals) which are then enabled on a per-board basis as needed.

So please just drop the status property from you fusb302 node.


Heiko