[PATCH v2 2/3] arm64: dts: rockchip: prepare common .dtsi for Radxa ROCK Pi E
FUKAUMI Naoki
naoki at radxa.com
Sun Jun 23 05:23:36 PDT 2024
Radxa ROCK Pi E v1.2x and ROCK Pi E v3.0 share most of their parts.
prepare rk3328-rock-pi-e-base.dtsi as a common dtsi for both boards.
Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
Changes in v2:
- include changes for rk3328-rock-pi-e.dts to make dtb buildable
---
.../dts/rockchip/rk3328-rock-pi-e-base.dtsi | 442 ++++++++++++++++++
.../boot/dts/rockchip/rk3328-rock-pi-e.dts | 437 +----------------
2 files changed, 443 insertions(+), 436 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-base.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-base.dtsi
new file mode 100644
index 000000000000..b2c5089ad2f8
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-base.dtsi
@@ -0,0 +1,442 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * (C) Copyright 2020 Chen-Yu Tsai <wens at csie.org>
+ *
+ * Based on ./rk3328-rock64.dts, which is
+ *
+ * Copyright (c) 2017 PINE64
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3328.dtsi"
+
+/ {
+ aliases {
+ ethernet0 = &gmac2io;
+ ethernet1 = &gmac2phy;
+ mmc0 = &sdmmc;
+ mmc1 = &emmc;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1750000>;
+
+ /* This button is unpopulated out of the factory. */
+ button-recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <10000>;
+ };
+ };
+
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pin>;
+ pinctrl-names = "default";
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0m1_pin>;
+ regulator-name = "vcc_sd";
+ regulator-boot-on;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_host_5v: vcc-host-5v-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb30_host_drv>;
+ enable-active-high;
+ regulator-name = "vcc_host_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc_wifi: vcc-wifi-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_en>;
+ regulator-name = "vcc_wifi";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&analog_sound {
+ status = "okay";
+};
+
+&codec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc18_emmc>;
+ status = "okay";
+};
+
+&gmac2io {
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+ clock_in_out = "input";
+ phy-handle = <&rtl8211>;
+ phy-mode = "rgmii";
+ phy-supply = <&vcc_io>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_pins>;
+ snps,aal;
+ snps,rxpbl = <0x4>;
+ snps,txpbl = <0x4>;
+ tx_delay = <0x26>;
+ rx_delay = <0x11>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8211: ethernet-phy at 1 {
+ reg = <1>;
+ pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio1>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gmac2phy {
+ status = "okay";
+};
+
+&gpio0 {
+ gpio-line-names =
+ /* GPIO0_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_B0 - B7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_D0 - D7 */
+ "", "", "", "pin-15 [GPIO0_D3]", "", "", "", "";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /* GPIO1_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_B0 - B7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_D0 - D7 */
+ "", "", "", "", "pin-07 [GPIO1_D4]", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ /* GPIO2_A0 - A7 */
+ "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]",
+ "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]",
+ "pin-33 [GPIO2_A6]", "",
+ /* GPIO2_B0 - B7 */
+ "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]",
+ /* GPIO2_C0 - C7 */
+ "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]",
+ "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]",
+ "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]",
+ /* GPIO2_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ /* GPIO3_A0 - A7 */
+ "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]",
+ "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "",
+ /* GPIO3_B0 - B7 */
+ "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "",
+ /* GPIO3_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO3_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+ status = "okay";
+
+ rk805: pmic at 18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk805-clkout2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_sys>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name = "vcc_io";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_18: LDO_REG1 {
+ regulator-name = "vcc_18";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_emmc: LDO_REG2 {
+ regulator-name = "vcc18_emmc";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
+ };
+};
+
+&i2s1 {
+ status = "okay";
+};
+
+&io_domains {
+ pmuio-supply = <&vcc_io>;
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_io>;
+ vccio4-supply = <&vcc_io>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&pinctrl {
+ ephy {
+ eth_phy_int_pin: eth-phy-int-pin {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ eth_phy_reset_pin: eth-phy-reset-pin {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ leds {
+ led_pin: led-pin {
+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb3 {
+ usb30_host_drv: usb30-host-drv {
+ rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_en: wifi-en {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_18>;
+ status = "okay";
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_host {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbdrd3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index a608a219543e..bdb2ca1a225f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -1,445 +1,10 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * (C) Copyright 2020 Chen-Yu Tsai <wens at csie.org>
- *
- * Based on ./rk3328-rock64.dts, which is
- *
- * Copyright (c) 2017 PINE64
- */
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-
-#include "rk3328.dtsi"
+#include "rk3328-rock-pi-e-base.dtsi"
/ {
model = "Radxa ROCK Pi E";
compatible = "radxa,rockpi-e", "rockchip,rk3328";
-
- aliases {
- ethernet0 = &gmac2io;
- ethernet1 = &gmac2phy;
- mmc0 = &sdmmc;
- mmc1 = &emmc;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 0>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1750000>;
-
- /* This button is unpopulated out of the factory. */
- button-recovery {
- label = "Recovery";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <10000>;
- };
- };
-
- gmac_clkin: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "gmac_clkin";
- #clock-cells = <0>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pin>;
- pinctrl-names = "default";
-
- led-0 {
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0m1_pin>;
- regulator-name = "vcc_sd";
- regulator-boot-on;
- vin-supply = <&vcc_io>;
- };
-
- vcc_host_5v: vcc-host-5v-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb30_host_drv>;
- enable-active-high;
- regulator-name = "vcc_host_5v";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vcc_wifi: vcc-wifi-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_en>;
- regulator-name = "vcc_wifi";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_io>;
- };
-};
-
-&analog_sound {
- status = "okay";
-};
-
-&codec {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu2 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu3 {
- cpu-supply = <&vdd_arm>;
-};
-
-&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
- vmmc-supply = <&vcc_io>;
- vqmmc-supply = <&vcc18_emmc>;
- status = "okay";
-};
-
-&gmac2io {
- assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
- assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
- clock_in_out = "input";
- phy-handle = <&rtl8211>;
- phy-mode = "rgmii";
- phy-supply = <&vcc_io>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmiim1_pins>;
- snps,aal;
- snps,rxpbl = <0x4>;
- snps,txpbl = <0x4>;
- tx_delay = <0x26>;
- rx_delay = <0x11>;
- status = "okay";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- rtl8211: ethernet-phy at 1 {
- reg = <1>;
- pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>;
- pinctrl-names = "default";
- interrupt-parent = <&gpio1>;
- interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <50000>;
- reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gmac2phy {
- status = "okay";
-};
-
-&gpio0 {
- gpio-line-names =
- /* GPIO0_A0 - A7 */
- "", "", "", "", "", "", "", "",
- /* GPIO0_B0 - B7 */
- "", "", "", "", "", "", "", "",
- /* GPIO0_C0 - C7 */
- "", "", "", "", "", "", "", "",
- /* GPIO0_D0 - D7 */
- "", "", "", "pin-15 [GPIO0_D3]", "", "", "", "";
-};
-
-&gpio1 {
- gpio-line-names =
- /* GPIO1_A0 - A7 */
- "", "", "", "", "", "", "", "",
- /* GPIO1_B0 - B7 */
- "", "", "", "", "", "", "", "",
- /* GPIO1_C0 - C7 */
- "", "", "", "", "", "", "", "",
- /* GPIO1_D0 - D7 */
- "", "", "", "", "pin-07 [GPIO1_D4]", "", "", "";
-};
-
-&gpio2 {
- gpio-line-names =
- /* GPIO2_A0 - A7 */
- "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]",
- "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]",
- "pin-33 [GPIO2_A6]", "",
- /* GPIO2_B0 - B7 */
- "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]",
- /* GPIO2_C0 - C7 */
- "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]",
- "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]",
- "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]",
- /* GPIO2_D0 - D7 */
- "", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
- gpio-line-names =
- /* GPIO3_A0 - A7 */
- "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]",
- "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "",
- /* GPIO3_B0 - B7 */
- "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "",
- /* GPIO3_C0 - C7 */
- "", "", "", "", "", "", "", "",
- /* GPIO3_D0 - D7 */
- "", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
- status = "okay";
-
- rk805: pmic at 18 {
- compatible = "rockchip,rk805";
- reg = <0x18>;
- interrupt-parent = <&gpio0>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk805-clkout2";
- gpio-controller;
- #gpio-cells = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc5-supply = <&vcc_io>;
- vcc6-supply = <&vcc_sys>;
-
- regulators {
- vdd_log: DCDC_REG1 {
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1450000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vdd_arm: DCDC_REG2 {
- regulator-name = "vdd_arm";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1450000>;
- regulator-ramp-delay = <12500>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-name = "vcc_io";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_18: LDO_REG1 {
- regulator-name = "vcc_18";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc18_emmc: LDO_REG2 {
- regulator-name = "vcc18_emmc";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-name = "vdd_10";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
- };
- };
-};
-
-&i2s1 {
- status = "okay";
-};
-
-&io_domains {
- pmuio-supply = <&vcc_io>;
- vccio1-supply = <&vcc_io>;
- vccio2-supply = <&vcc18_emmc>;
- vccio3-supply = <&vcc_io>;
- vccio4-supply = <&vcc_io>;
- vccio5-supply = <&vcc_io>;
- vccio6-supply = <&vcc_io>;
- status = "okay";
-};
-
-&pinctrl {
- ephy {
- eth_phy_int_pin: eth-phy-int-pin {
- rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- eth_phy_reset_pin: eth-phy-reset-pin {
- rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- leds {
- led_pin: led-pin {
- rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb3 {
- usb30_host_drv: usb30-host-drv {
- rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wifi {
- wifi_en: wifi-en {
- rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-sd-highspeed;
- disable-wp;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
- vmmc-supply = <&vcc_sd>;
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc_18>;
- status = "okay";
-};
-
-&tsadc {
- status = "okay";
-};
-
-&u2phy {
- status = "okay";
-};
-
-&u2phy_host {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usbdrd3 {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
};
--
2.43.0
More information about the Linux-rockchip
mailing list