[PATCH v3 2/4] media: rockchip: Introduce the rkvdec2 driver
Jonas Karlman
jonas at kwiboo.se
Fri Jun 21 01:20:23 PDT 2024
Hi Datlev,
Some small and quick feedback below.
On 2024-06-20 16:19, Detlev Casanova wrote:
> This driver supports the second generation of the Rockchip Video
> decoder, also known as vdpu34x.
> It is currently only used on the RK3588(s) SoC.
>
> There are 2 decoders on the RK3588 SoC that can work in pair to decode
> 8K video at 30 FPS but currently, only using one core at a time is
> supported.
>
> Scheduling requests between the two cores will be implemented later.
>
> The core supports H264, HEVC, VP9 and AVS2 decoding but this driver
> currently only supports H264.
>
> The driver is based on rkvdec and they may share some code in the
> future.
> The decision to make a different driver is mainly because rkvdec2 has
> more features and can work with multiple cores.
>
> The registers are mapped in a struct in RAM using bitfields. It is IO
> copied to the HW when all values are configured.
> The decision to use such a struct instead of writing buffers one by one
> is based on the following reasons:
> - Rockchip cores are known to misbehave when registers are not written
> in address order,
> - Those cores also need the software to write all registers, even if
> they are written their default values or are not related to the task
> (this core will not start decoding some H264 frames if some VP9
> registers are not written to 0)
> - In the future, to support multiple cores, the scheduler could be
> optimized by storing the precomputed registers values and copy them
> to the HW as soos as a core becomes available.
>
> This makes the code more readable and may bring performance improvements
> in future features.
>
> Signed-off-by: Detlev Casanova <detlev.casanova at collabora.com>
> ---
> drivers/staging/media/Kconfig | 1 +
> drivers/staging/media/Makefile | 1 +
> drivers/staging/media/rkvdec2/Kconfig | 15 +
> drivers/staging/media/rkvdec2/Makefile | 3 +
> drivers/staging/media/rkvdec2/TODO | 9 +
> drivers/staging/media/rkvdec2/rkvdec2-h264.c | 739 +++++++++++
> drivers/staging/media/rkvdec2/rkvdec2-regs.h | 345 +++++
> drivers/staging/media/rkvdec2/rkvdec2.c | 1253 ++++++++++++++++++
> drivers/staging/media/rkvdec2/rkvdec2.h | 130 ++
> 9 files changed, 2496 insertions(+)
> create mode 100644 drivers/staging/media/rkvdec2/Kconfig
> create mode 100644 drivers/staging/media/rkvdec2/Makefile
> create mode 100644 drivers/staging/media/rkvdec2/TODO
> create mode 100644 drivers/staging/media/rkvdec2/rkvdec2-h264.c
> create mode 100644 drivers/staging/media/rkvdec2/rkvdec2-regs.h
> create mode 100644 drivers/staging/media/rkvdec2/rkvdec2.c
> create mode 100644 drivers/staging/media/rkvdec2/rkvdec2.h
>
> diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
> index 554c2e475ce3..7f377d37e670 100644
> --- a/drivers/staging/media/Kconfig
> +++ b/drivers/staging/media/Kconfig
> @@ -35,6 +35,7 @@ source "drivers/staging/media/meson/vdec/Kconfig"
> source "drivers/staging/media/omap4iss/Kconfig"
>
> source "drivers/staging/media/rkvdec/Kconfig"
> +source "drivers/staging/media/rkvdec2/Kconfig"
>
> source "drivers/staging/media/starfive/Kconfig"
>
> diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
> index dcaeeca0ee6d..0a2d89db32b2 100644
> --- a/drivers/staging/media/Makefile
> +++ b/drivers/staging/media/Makefile
> @@ -6,6 +6,7 @@ obj-$(CONFIG_VIDEO_MAX96712) += max96712/
> obj-$(CONFIG_VIDEO_MESON_VDEC) += meson/vdec/
> obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/
> obj-$(CONFIG_VIDEO_ROCKCHIP_VDEC) += rkvdec/
> +obj-$(CONFIG_VIDEO_ROCKCHIP_VDEC2) += rkvdec2/
> obj-$(CONFIG_VIDEO_STARFIVE_CAMSS) += starfive/
> obj-$(CONFIG_VIDEO_SUNXI) += sunxi/
> obj-$(CONFIG_VIDEO_TEGRA) += tegra-video/
> diff --git a/drivers/staging/media/rkvdec2/Kconfig b/drivers/staging/media/rkvdec2/Kconfig
> new file mode 100644
> index 000000000000..fd505cb7aff9
> --- /dev/null
> +++ b/drivers/staging/media/rkvdec2/Kconfig
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: GPL-2.0
> +config VIDEO_ROCKCHIP_VDEC2
> + tristate "Rockchip Video Decoder driver 2"
> + depends on ARCH_ROCKCHIP || COMPILE_TEST
> + depends on VIDEO_DEV
> + select MEDIA_CONTROLLER
> + select VIDEOBUF2_DMA_CONTIG
> + select VIDEOBUF2_VMALLOC
> + select V4L2_MEM2MEM_DEV
> + select V4L2_H264
> + help
> + Support for the Rockchip Video Decoder 2 IP present on Rockchip SoCs,
> + which accelerates video decoding.
> + To compile this driver as a module, choose M here: the module
> + will be called rockchip-vdec2.
> diff --git a/drivers/staging/media/rkvdec2/Makefile b/drivers/staging/media/rkvdec2/Makefile
> new file mode 100644
> index 000000000000..b5a6ac701970
> --- /dev/null
> +++ b/drivers/staging/media/rkvdec2/Makefile
> @@ -0,0 +1,3 @@
> +obj-$(CONFIG_VIDEO_ROCKCHIP_VDEC2) += rockchip-vdec2.o
> +
> +rockchip-vdec2-y += rkvdec2.o rkvdec2-h264.o
> diff --git a/drivers/staging/media/rkvdec2/TODO b/drivers/staging/media/rkvdec2/TODO
> new file mode 100644
> index 000000000000..9f64270e789e
> --- /dev/null
> +++ b/drivers/staging/media/rkvdec2/TODO
> @@ -0,0 +1,9 @@
> +* Support for 4:2:2 and 10 bits
> +* Support for rockchip IOMMU
> +* Support for HEVC and VP9 are planned for this driver.
> +
> + First, the h264 backend needs to be stabilized.
> +
> +* Evaluate sharing code with rkvdec
> +
> + As rkvdec is still in staging, this driver stays there as well.
> diff --git a/drivers/staging/media/rkvdec2/rkvdec2-h264.c b/drivers/staging/media/rkvdec2/rkvdec2-h264.c
> new file mode 100644
> index 000000000000..37606f6833a1
> --- /dev/null
> +++ b/drivers/staging/media/rkvdec2/rkvdec2-h264.c
> @@ -0,0 +1,739 @@
[snip]
> +
> +/* Data structure describing auxiliary buffer format. */
> +struct rkvdec2_h264_priv_tbl {
> + u32 cabac_table[928];
This should probably now match rkvdec, i.e. s8 cabac_table[4][464][2];
> + struct rkvdec2_h264_scaling_list scaling_list;
> + struct rkvdec2_sps_pps param_set[256];
> + struct rkvdec2_rps rps;
> +};
> +
> +struct rkvdec2_h264_reflists {
> + struct v4l2_h264_reference p[V4L2_H264_REF_LIST_LEN];
> + struct v4l2_h264_reference b0[V4L2_H264_REF_LIST_LEN];
> + struct v4l2_h264_reference b1[V4L2_H264_REF_LIST_LEN];
> +};
> +
> +struct rkvdec2_h264_run {
> + struct rkvdec2_run base;
> + const struct v4l2_ctrl_h264_decode_params *decode_params;
> + const struct v4l2_ctrl_h264_sps *sps;
> + const struct v4l2_ctrl_h264_pps *pps;
> + const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
These are aligned, others are not, please be consistent.
> + struct vb2_buffer *ref_buf[V4L2_H264_NUM_DPB_ENTRIES];
> +};
> +
> +struct rkvdec2_h264_ctx {
> + struct rkvdec2_aux_buf priv_tbl;
> + struct rkvdec2_h264_reflists reflists;
> + struct rkvdec2_regs_h264 regs;
Same as above, please be consistent for all structs.
> +};
> +
> +static void assemble_hw_pps(struct rkvdec2_ctx *ctx,
> + struct rkvdec2_h264_run *run)
> +{
> + struct rkvdec2_h264_ctx *h264_ctx = ctx->priv;
> + const struct v4l2_ctrl_h264_sps *sps = run->sps;
> + const struct v4l2_ctrl_h264_pps *pps = run->pps;
> + const struct v4l2_ctrl_h264_decode_params *dec_params = run->decode_params;
> + const struct v4l2_h264_dpb_entry *dpb = dec_params->dpb;
> + struct rkvdec2_h264_priv_tbl *priv_tbl = h264_ctx->priv_tbl.cpu;
> + struct rkvdec2_sps_pps *hw_ps;
> + dma_addr_t scaling_list_address;
> + u32 scaling_distance;
> + u32 i;
> +
> + /*
> + * HW read the SPS/PPS information from PPS packet index by PPS id.
> + * offset from the base can be calculated by PPS_id * 32 (size per PPS
> + * packet unit). so the driver copy SPS/PPS information to the exact PPS
> + * packet unit for HW accessing.
> + */
> + hw_ps = &priv_tbl->param_set[pps->pic_parameter_set_id];
> + memset(hw_ps, 0, sizeof(*hw_ps));
> +
> + /* write sps */
> + hw_ps->sps.seq_parameter_set_id = 0xf;
This should use sps->seq_parameter_set_id
> + hw_ps->sps.profile_idc = 0xff;
This shold use sps->profile_idc
> + hw_ps->sps.constraint_set3_flag = 1;
This should use !!(sps->constraint_set_flags & (1 << 3))
> + hw_ps->sps.chroma_format_idc = sps->chroma_format_idc;
> + hw_ps->sps.bit_depth_luma = sps->bit_depth_luma_minus8;
> + hw_ps->sps.bit_depth_chroma = sps->bit_depth_chroma_minus8;
> + hw_ps->sps.qpprime_y_zero_transform_bypass_flag = 0;
This should use
!!(sps->flags & V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS)
> + hw_ps->sps.log2_max_frame_num_minus4 = sps->log2_max_frame_num_minus4;
> + hw_ps->sps.max_num_ref_frames = sps->max_num_ref_frames;
> + hw_ps->sps.pic_order_cnt_type = sps->pic_order_cnt_type;
> + hw_ps->sps.log2_max_pic_order_cnt_lsb_minus4 =
> + sps->log2_max_pic_order_cnt_lsb_minus4;
> + hw_ps->sps.delta_pic_order_always_zero_flag =
> + !!(sps->flags & V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO);
> + hw_ps->sps.mvc_extension_enable = 1;
> + hw_ps->sps.num_views = 1;
> +
> + /*
> + * Use the SPS values since they are already in macroblocks
> + * dimensions, height can be field height (halved) if
> + * V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY is not set and also it allows
> + * decoding smaller images into larger allocation which can be used
> + * to implementing SVC spatial layer support.
> + */
> + hw_ps->sps.pic_width_in_mbs = sps->pic_width_in_mbs_minus1 + 1;
> + hw_ps->sps.pic_height_in_mbs = sps->pic_height_in_map_units_minus1 + 1;
> + hw_ps->sps.frame_mbs_only_flag =
> + !!(sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY);
> + hw_ps->sps.mb_adaptive_frame_field_flag =
> + !!(sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD);
> + hw_ps->sps.direct_8x8_inference_flag =
> + !!(sps->flags & V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE);
> +
> + /* write pps */
> + hw_ps->pps.pic_parameter_set_id = 0xff;
This should use pps->pic_parameter_set_id
> + hw_ps->pps.pps_seq_parameter_set_id = 0x1f;
This should use pps->seq_parameter_set_id
Fluster score is not affected by these changes and follow
https://lore.kernel.org/linux-media/20240618194647.742037-5-jonas@kwiboo.se/
> + hw_ps->pps.entropy_coding_mode_flag =
> + !!(pps->flags & V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE);
> + hw_ps->pps.bottom_field_pic_order_in_frame_present_flag =
> + !!(pps->flags & V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT);
> + hw_ps->pps.num_ref_idx_l0_default_active_minus1 =
> + pps->num_ref_idx_l0_default_active_minus1;
> + hw_ps->pps.num_ref_idx_l1_default_active_minus1 =
> + pps->num_ref_idx_l1_default_active_minus1;
> + hw_ps->pps.weighted_pred_flag =
> + !!(pps->flags & V4L2_H264_PPS_FLAG_WEIGHTED_PRED);
> + hw_ps->pps.weighted_bipred_idc = pps->weighted_bipred_idc;
> + hw_ps->pps.pic_init_qp_minus26 = pps->pic_init_qp_minus26;
> + hw_ps->pps.pic_init_qs_minus26 = pps->pic_init_qs_minus26;
> + hw_ps->pps.chroma_qp_index_offset = pps->chroma_qp_index_offset;
> + hw_ps->pps.deblocking_filter_control_present_flag =
> + !!(pps->flags & V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT);
> + hw_ps->pps.constrained_intra_pred_flag =
> + !!(pps->flags & V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED);
> + hw_ps->pps.redundant_pic_cnt_present =
> + !!(pps->flags & V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT);
> + hw_ps->pps.transform_8x8_mode_flag =
> + !!(pps->flags & V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE);
> + hw_ps->pps.second_chroma_qp_index_offset = pps->second_chroma_qp_index_offset;
> + hw_ps->pps.scaling_list_enable_flag =
> + !!(pps->flags & V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT);
> +
> + /*
> + * To be on the safe side, program the scaling matrix address
> + *
> + * With this set here,
> + * RKVDEC_SWREG12_SENCODARY_EN:sw_scanlist_addr_valid_en
> + * can stay at 0
> + */
> + scaling_distance = offsetof(struct rkvdec2_h264_priv_tbl, scaling_list);
> + scaling_list_address = h264_ctx->priv_tbl.dma + scaling_distance;
> + hw_ps->pps.scaling_list_address = scaling_list_address;
> +
> + for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
> + if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM)
> + hw_ps->pps.is_longterm |= (1 << i);
> + }
> +}
> +
[snip]
> diff --git a/drivers/staging/media/rkvdec2/rkvdec2.c b/drivers/staging/media/rkvdec2/rkvdec2.c
> new file mode 100644
> index 000000000000..464eec67521b
> --- /dev/null
> +++ b/drivers/staging/media/rkvdec2/rkvdec2.c
> @@ -0,0 +1,1253 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Rockchip Video Decoder 2 driver
> + *
> + * Copyright (C) 2024 Collabora, Ltd.
> + * Detlev Casanova <detlev.casanova at collabora.com>
> + *
> + * Based on rkvdec driver by Boris Brezillon <boris.brezillon at collabora.com>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/genalloc.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/slab.h>
> +#include <linux/videodev2.h>
> +#include <linux/workqueue.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-mem2mem.h>
> +#include <media/videobuf2-core.h>
> +#include <media/videobuf2-vmalloc.h>
> +
> +#include "rkvdec2.h"
> +
> +static int rkvdec2_try_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct rkvdec2_ctx *ctx = container_of(ctrl->handler, struct rkvdec2_ctx, ctrl_hdl);
> + const struct rkvdec2_coded_fmt_desc *desc = ctx->coded_fmt_desc;
> +
> + if (desc->ops->try_ctrl)
> + return desc->ops->try_ctrl(ctx, ctrl);
> +
> + return 0;
> +}
> +
> +static const struct v4l2_ctrl_ops rkvdec2_ctrl_ops = {
> + .try_ctrl = rkvdec2_try_ctrl,
> +};
> +
> +static const struct rkvdec2_ctrl_desc rkvdec2_h264_ctrl_descs[] = {
> + {
> + .cfg.id = V4L2_CID_STATELESS_H264_DECODE_PARAMS,
> + },
> + {
> + .cfg.id = V4L2_CID_STATELESS_H264_SPS,
> + .cfg.ops = &rkvdec2_ctrl_ops,
> + },
> + {
> + .cfg.id = V4L2_CID_STATELESS_H264_PPS,
> + },
> + {
> + .cfg.id = V4L2_CID_STATELESS_H264_SCALING_MATRIX,
> + },
> + {
> + .cfg.id = V4L2_CID_STATELESS_H264_DECODE_MODE,
> + .cfg.min = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> + .cfg.max = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> + .cfg.def = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> + },
> + {
> + .cfg.id = V4L2_CID_STATELESS_H264_START_CODE,
> + .cfg.min = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> + .cfg.def = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> + .cfg.max = V4L2_STATELESS_H264_START_CODE_ANNEX_B,
> + },
> + {
> + .cfg.id = V4L2_CID_MPEG_VIDEO_H264_PROFILE,
> + .cfg.min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE,
Should be V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE
> + .cfg.max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH,
> + .cfg.menu_skip_mask =
> + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED),
> + .cfg.def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN,
> + },
> + {
> + .cfg.id = V4L2_CID_MPEG_VIDEO_H264_LEVEL,
> + .cfg.min = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
> + .cfg.max = V4L2_MPEG_VIDEO_H264_LEVEL_6_1,
> + },
> +};
> +
> +static const struct rkvdec2_ctrls rkvdec2_h264_ctrls = {
> + .ctrls = rkvdec2_h264_ctrl_descs,
> + .num_ctrls = ARRAY_SIZE(rkvdec2_h264_ctrl_descs),
> +};
> +
> +static const u32 rkvdec2_h264_decoded_fmts[] = {
> + V4L2_PIX_FMT_NV12
> +};
> +
> +static const struct rkvdec2_coded_fmt_desc rkvdec2_coded_fmts[] = {
> + {
> + .fourcc = V4L2_PIX_FMT_H264_SLICE,
> + .frmsize = {
> + .min_width = 16,
> + .max_width = 65520,
> + .step_width = 16,
> + .min_height = 16,
> + .max_height = 65520,
> + .step_height = 16,
> + },
> + .ctrls = &rkvdec2_h264_ctrls,
> + .ops = &rkvdec2_h264_fmt_ops,
> + .num_decoded_fmts = ARRAY_SIZE(rkvdec2_h264_decoded_fmts),
> + .decoded_fmts = rkvdec2_h264_decoded_fmts,
> + .subsystem_flags = VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF,
> + },
> +};
> +
> +enum rcb_axis {
> + PIC_WIDTH = 0,
> + PIC_HEIGHT = 1
> +};
> +
> +struct rcb_size_info {
> + u8 multiplier;
> + enum rcb_axis axis;
> +};
> +
> +static struct rcb_size_info rcb_sizes[] = {
> + {6, PIC_WIDTH}, // intrar
> + {1, PIC_WIDTH}, // transdr (Is actually 0.4*pic_width)
> + {1, PIC_HEIGHT}, // transdc (Is actually 0.1*pic_height)
> + {3, PIC_WIDTH}, // streamdr
> + {6, PIC_WIDTH}, // interr
> + {3, PIC_HEIGHT}, // interc
> + {22, PIC_WIDTH}, // dblkr
> + {6, PIC_WIDTH}, // saor
> + {11, PIC_WIDTH}, // fbcr
> + {67, PIC_HEIGHT}, // filtc col
> +};
> +
> +#define RCB_SIZE(n) (rcb_sizes[(n)].multiplier * (rcb_sizes[(n)].axis ? height : width))
This should probably take width and height, e.g.:
RCB_SIZE(n,w,h) (rcb_sizes[(n)].multiplier * (rcb_sizes[(n)].axis ? (h) : (w)))
> +
> +static const struct rkvdec2_coded_fmt_desc *
> +rkvdec2_find_coded_fmt_desc(u32 fourcc)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(rkvdec2_coded_fmts); i++) {
> + if (rkvdec2_coded_fmts[i].fourcc == fourcc)
> + return &rkvdec2_coded_fmts[i];
> + }
> +
> + return NULL;
> +}
> +
> +static void rkvdec2_reset_fmt(struct rkvdec2_ctx *ctx, struct v4l2_format *f,
> + u32 fourcc)
> +{
> + memset(f, 0, sizeof(*f));
> + f->fmt.pix_mp.pixelformat = fourcc;
> + f->fmt.pix_mp.field = V4L2_FIELD_NONE;
> + f->fmt.pix_mp.colorspace = V4L2_COLORSPACE_REC709;
> + f->fmt.pix_mp.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> + f->fmt.pix_mp.quantization = V4L2_QUANTIZATION_DEFAULT;
> + f->fmt.pix_mp.xfer_func = V4L2_XFER_FUNC_DEFAULT;
> +}
> +
> +static void rkvdec2_reset_coded_fmt(struct rkvdec2_ctx *ctx)
> +{
> + struct v4l2_format *f = &ctx->coded_fmt;
> +
> + ctx->coded_fmt_desc = &rkvdec2_coded_fmts[0];
> + rkvdec2_reset_fmt(ctx, f, ctx->coded_fmt_desc->fourcc);
> +
> + f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
> + f->fmt.pix_mp.width = ctx->coded_fmt_desc->frmsize.min_width;
> + f->fmt.pix_mp.height = ctx->coded_fmt_desc->frmsize.min_height;
> +
> + if (ctx->coded_fmt_desc->ops->adjust_fmt)
> + ctx->coded_fmt_desc->ops->adjust_fmt(ctx, f);
> +}
> +
> +static void rkvdec2_reset_decoded_fmt(struct rkvdec2_ctx *ctx)
> +{
> + struct v4l2_format *f = &ctx->decoded_fmt;
> +
> + rkvdec2_reset_fmt(ctx, f, ctx->coded_fmt_desc->decoded_fmts[0]);
> + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
> + v4l2_fill_pixfmt_mp(&f->fmt.pix_mp,
> + ctx->coded_fmt_desc->decoded_fmts[0],
> + ctx->coded_fmt.fmt.pix_mp.width,
> + ctx->coded_fmt.fmt.pix_mp.height);
> +
> + ctx->colmv_offset = f->fmt.pix_mp.plane_fmt[0].sizeimage;
> +
> + f->fmt.pix_mp.plane_fmt[0].sizeimage += 128 *
> + DIV_ROUND_UP(f->fmt.pix_mp.width, 16) *
> + DIV_ROUND_UP(f->fmt.pix_mp.height, 16);
> +}
> +
> +static int rkvdec2_enum_framesizes(struct file *file, void *priv,
> + struct v4l2_frmsizeenum *fsize)
> +{
> + const struct rkvdec2_coded_fmt_desc *fmt;
This should probably be named desc to match other uses.
Regards,
Jonas
> +
> + if (fsize->index != 0)
> + return -EINVAL;
> +
> + fmt = rkvdec2_find_coded_fmt_desc(fsize->pixel_format);
> + if (!fmt)
> + return -EINVAL;
> +
> + fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
> + fsize->stepwise = fmt->frmsize;
> + return 0;
> +}
> +
[snip]
More information about the Linux-rockchip
mailing list