[PATCH v1 2/3] net: wireless: brcmfmac: Add optional 32k clock enable support

[Krzysztof Kozlowski]

On 20/06/2024 04:00, Jacobe Zang wrote:
> WiFi modules often require 32kHz clock to function. Add support to
> enable the clock to PCIe driver.
> 
> Signed-off-by: Jacobe Zang <jacobe.zang at wesion.com>
> ---
>  .../net/wireless/broadcom/brcm80211/brcmfmac/pcie.c    | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
> index 06698a714b523..f241e1757d7e3 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
> @@ -3,6 +3,7 @@
>   * Copyright (c) 2014 Broadcom Corporation
>   */
>  
> +#include <linux/clk.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/firmware.h>
> @@ -2411,6 +2412,7 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  	struct brcmf_pciedev *pcie_bus_dev;
>  	struct brcmf_core *core;
>  	struct brcmf_bus *bus;
> +	struct clk *clk;
>  
>  	if (!id) {
>  		id = pci_match_id(brcmf_pcie_devid_table, pdev);
> @@ -2422,6 +2424,14 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  
>  	brcmf_dbg(PCIE, "Enter %x:%x\n", pdev->vendor, pdev->device);
>  
> +	clk = devm_clk_get_optional_enabled(&pdev->dev, "32k");

Where is the binding for this?

> +	if (IS_ERR(clk))
> +		return PTR_ERR(clk);
> +	if (clk) {
> +		dev_info(&pdev->dev, "enabling 32kHz clock\n");

Drop



Best regards,
Krzysztof