[PATCH 1/2] arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E

[FUKAUMI Naoki]

use GPIO0_A2 as interrupt pin for PMIC. GPIO2_A6 was used for
pre-production board.

Fixes: b918e81f2145 ("arm64: dts: rockchip: rk3328: Add Radxa ROCK Pi E")
Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
---
 arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index f09d60bbe6c4..a608a219543e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -241,8 +241,8 @@ &i2c1 {
 	rk805: pmic at 18 {
 		compatible = "rockchip,rk805";
 		reg = <0x18>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <1>;
 		clock-output-names = "xin32k", "rk805-clkout2";
 		gpio-controller;
-- 
2.43.0