[PATCH v1 3/3] dt-bindings: net: remove arc_emac.txt

[Johan Jonker]

The last real user nSIM_700 of the "snps,arc-emac" compatible string in
a driver was removed in 2019. The use of this string in the combined DT of
rk3066a/rk3188 as place holder has also been replaced, so
remove arc_emac.txt

Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---

[PATCH 8/8] ARC: nSIM_700: remove unused network options
https://lore.kernel.org/all/20191023124417.5770-9-Eugeniy.Paltsev@synopsys.com/
---
 .../devicetree/bindings/net/arc_emac.txt      | 46 -------------------
 1 file changed, 46 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/arc_emac.txt

diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt
deleted file mode 100644
index c73a0e9c625e..000000000000
--- a/Documentation/devicetree/bindings/net/arc_emac.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Synopsys ARC EMAC 10/100 Ethernet driver (EMAC)
-
-Required properties:
-- compatible: Should be "snps,arc-emac"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the EMAC interrupts
-- max-speed: see ethernet.txt file in the same directory.
-- phy: see ethernet.txt file in the same directory.
-
-Optional properties:
-- phy-reset-gpios : Should specify the gpio for phy reset
-- phy-reset-duration : Reset duration in milliseconds.  Should present
-  only if property "phy-reset-gpios" is available.  Missing the property
-  will have the duration be 1 millisecond.  Numbers greater than 1000 are
-  invalid and 1 millisecond will be used instead.
-
-Clock handling:
-The clock frequency is needed to calculate and set polling period of EMAC.
-It must be provided by one of:
-- clock-frequency: CPU frequency.
-- clocks: reference to the clock supplying the EMAC.
-
-Child nodes of the driver are the individual PHY devices connected to the
-MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
-
-Examples:
-
-	ethernet at c0fc2000 {
-		compatible = "snps,arc-emac";
-		reg = <0xc0fc2000 0x3c>;
-		interrupts = <6>;
-		mac-address = [ 00 11 22 33 44 55 ];
-
-		clock-frequency = <80000000>;
-		/* or */
-		clocks = <&emac_clock>;
-
-		max-speed = <100>;
-		phy = <&phy0>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-		phy0: ethernet-phy at 0 {
-			reg = <1>;
-		};
-	};
--
2.39.2