[PATCH 3/9] dt-bindings: mailbox: rockchip,rknn: Add bindings

[Rob Herring]

On Wed, Jun 12, 2024 at 03:52:56PM +0200, Tomeu Vizoso wrote:
> Add the bindings for the Neural Processing Unit IP from Rockchip.

Subject is wrong. Not a mailbox...

> Signed-off-by: Tomeu Vizoso <tomeu at tomeuvizoso.net>
> ---
>  .../devicetree/bindings/npu/rockchip,rknn.yaml     | 123 +++++++++++++++++++++
>  1 file changed, 123 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/npu/rockchip,rknn.yaml b/Documentation/devicetree/bindings/npu/rockchip,rknn.yaml
> new file mode 100644
> index 000000000000..570a4889c11c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/npu/rockchip,rknn.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/npu/rockchip,rknn.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Neural Processing Unit IP from Rockchip, based on NVIDIA's NVDLA
> +
> +maintainers:
> +  - Tomeu Vizoso <tomeu at tomeuvizoso.net>
> +
> +description: |+
> +  Rockchip IP for accelerating inference of neural networks, based on NVIDIA's open source NVDLA IP.

Wrap at 80.

> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - rockchip,rk3588-rknn
> +      - const: rockchip,rknn

Is there any evidence this block is 'the same' on multiple chips?

> +
> +  reg:
> +    description: Base registers for NPU cores
> +    minItems: 1
> +    maxItems: 20
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 20
> +
> +  interrupt-names:
> +    minItems: 1
> +    maxItems: 20
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 20
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 20
> +
> +  assigned-clocks:
> +    maxItems: 1
> +
> +  assigned-clock-rates:
> +    maxItems: 1

You don't need assigned-clocks in schemas.

> +
> +  resets:
> +    minItems: 1
> +    maxItems: 20
> +
> +  reset-names:
> +    minItems: 1
> +    maxItems: 20
> +
> +  power-domains:
> +    minItems: 1
> +    maxItems: 20
> +
> +  power-domain-names:
> +    minItems: 1
> +    maxItems: 20
> +
> +  iommus:
> +    items:
> +      - description: IOMMU for all cores
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - assigned-clocks
> +  - assigned-clock-rates

And never should be required.

> +  - resets
> +  - reset-names
> +  - power-domains
> +  - power-domain-names
> +  - iommus
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    bus {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        rknn: npu at fdab0000 {
> +          compatible = "rockchip,rk3588-rknn", "rockchip,rknn";
> +          reg = <0x0 0xfdab0000 0x0 0x9000>,
> +                <0x0 0xfdac0000 0x0 0x9000>,
> +                <0x0 0xfdad0000 0x0 0x9000>;
> +          interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
> +                       <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>,
> +                       <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
> +          interrupt-names = "npu0_irq", "npu1_irq", "npu2_irq";

'irq' is redundant. Names with the index are also kind of pointless
unless they can be not contiguous.

> +          clocks = <&scmi_clk 0>, <&cru 1>,
> +                   <&cru 2>, <&cru 3>,
> +                   <&cru 4>, <&cru 5>,
> +                   <&cru 6>, <&cru 7>;
> +          clock-names = "clk_npu",

'clk_' is redundant.

> +                  "aclk0", "aclk1", "aclk2",
> +                  "hclk0", "hclk1", "hclk2",
> +                  "pclk";

Assuming 0, 1, 2 are cores and may vary, put all the fixed clocks first 
and then better to do "aclk0", "hclk0", "aclk1", "hclk1",...

> +          assigned-clocks = <&scmi_clk 0>;
> +          assigned-clock-rates = <200000000>;
> +          resets = <&cru 0>, <&cru 1>, <&cru 2>,
> +                   <&cru 3>, <&cru 4>, <&cru 5>;
> +          reset-names = "srst_a0", "srst_a1", "srst_a2",
> +                        "srst_h0", "srst_h1", "srst_h2";

And similar order here.

> +          power-domains = <&power 0>, <&power 1>, <&power 2>;
> +          power-domain-names = "npu0", "npu1", "npu2";
> +          iommus = <&rknpu_mmu>;
> +          status = "disabled";
> +        };
> +    };
> +...
> 
> -- 
> 2.45.2
>