[PATCH v2] dt-bindings: phy: rockchip-emmc-phy: Convert to dtschema

[Rob Herring (Arm)]

On Wed, 12 Jun 2024 21:33:37 +0530, Shresth Prasad wrote:
> Convert txt bindings of Rockchip EMMC PHY to dtschema to allow
> for validation.
> 
> Signed-off-by: Shresth Prasad <shresthprasad7 at gmail.com>
> ---
> Changes in v2:
>     - Fixed example
>     - Changed file referenced in grf.yaml
> 
> Tested against `rockchip/rk3399-firefly.dtb`, `rockchip/rk3399-orangepi.dtb`
> and `rockchip/rk3399-pinebook-pro.dtb`.
> 
>  .../bindings/phy/rockchip,emmc-phy.yaml       | 79 +++++++++++++++++++
>  .../bindings/phy/rockchip-emmc-phy.txt        | 43 ----------
>  .../devicetree/bindings/soc/rockchip/grf.yaml |  2 +-
>  3 files changed, 80 insertions(+), 44 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/rockchip,emmc-phy.yaml
>  delete mode 100644 Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/rockchip,emmc-phy.example.dtb: syscon at ff770000: reg: [[0, 4285988864], [0, 65536]] is too long
	from schema $id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/rockchip,emmc-phy.example.dtb: syscon at ff770000: reg: [[0, 4285988864], [0, 65536]] is too long
	from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240612160336.5132-2-shresthprasad7@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.