[PATCH v2 0/3] Add initial support for the Rockchip RK3588 HDMI TX Controller

[Cristian Ciocaltea]

The Rockchip RK3588 SoC family integrates the Synopsys DesignWare HDMI
2.1 Quad-Pixel (QP) TX controller [4], which is a new IP block, quite
different from those used in the previous generations of Rockchip SoCs.

This is the last component that needs to be supported in order to enable
the HDMI output functionality on the RK3588 based SBCs, such as the
RADXA Rock 5B. The other components are the Video Output Processor
(VOP2) and the Samsung IP based HDMI/eDP TX Combo PHY, for which basic
support has been already made available via [1] and [2], respectively.

Please note this is a reworked version of the original series, which
relied on a commonized dw-hdmi approach.  Since the general consensus
was to handle it as an entirely new IP, I dropped all patches related to
the old dw-hdmi and Rockchip glue code - a few of them might still make
sense as general improvements and will be submitted separately.

Additionally, as suggested by Neil, I've sent the reworked bridge driver
as a separate patchset [4], hence this series handles now just the new
Rockchip QP platform driver.

It's worth mentioning the HDMI output support is currently limited to
RGB output up to 4K at 60Hz, without audio, CEC or any of the HDMI 2.1
specific features.  Moreover, the VOP2 driver is not able to properly
handle all display modes supported by the connected screens, e.g. it
doesn't cope with non-integer refresh rates.

A possible workaround consists of enabling the display controller to
make use of the clock provided by the HDMI PHY PLL. This is still work
in progress and will be submitted later, as well as the required DTS
updates.

To facilitate testing and experimentation, all HDMI output related
patches, including those part of this series, as well as the bridge
driver, are available at [3].

So far I could only verify this on the RADXA Rock 5B board.

Thanks,
Cristian

[1]: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
[2]: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
[3]: https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux/-/commits/rk3588-hdmi-bridge-v6.11-rc1
[4]: https://lore.kernel.org/lkml/20240801-dw-hdmi-qp-tx-v1-0-148f542de5fd@collabora.com/

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
---
Changes in v2:
- Reworked the glue code for RK3588 into a new Rockchip platform driver
- Moved bridge driver patches to a separate series [4]
- Dropped all the patches touching to the old dw-hdmi and RK platform
  drivers
- Added connector creation to ensure the HDMI QP bridge driver does only
  support DRM_BRIDGE_ATTACH_NO_CONNECTOR
- Link to v1: https://lore.kernel.org/r/20240601-b4-rk3588-bridge-upstream-v1-0-f6203753232b@collabora.com

---
Cristian Ciocaltea (3):
      dt-bindings: display: rockchip: Add schema for RK3588 HDMI TX Controller
      drm/rockchip: Explicitly include bits header
      drm/rockchip: Add basic RK3588 HDMI output support

 .../display/rockchip/rockchip,dw-hdmi-qp.yaml      | 188 +++++++++
 drivers/gpu/drm/rockchip/Kconfig                   |   8 +
 drivers/gpu/drm/rockchip/Makefile                  |   1 +
 drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c     | 430 +++++++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c        |   2 +
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h        |   4 +-
 6 files changed, 632 insertions(+), 1 deletion(-)
---
base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0
change-id: 20240601-b4-rk3588-bridge-upstream-a27baff1b8fc