[PATCH v6 3/5] arm64: dts: rockchip: Add AP6275P wireless support to Khadas Edge 2

Arend Van Spriel arend.vanspriel at broadcom.com
Tue Jul 30 23:41:24 PDT 2024


On July 31, 2024 8:11:58 AM Jacobe Zang <jacobe.zang at wesion.com> wrote:

> Khadas Edge2 uses the PCI-e Ampak AP6275P 2T2R Wi-Fi 6 module. The
> pcie at 0 node can be used as Bridge1, so the wifi at 0 node is used as a
> device under the Bridge1.
>
> Co-developed-by: Muhammed Efe Cetin <efectn at protonmail.com>
> Signed-off-by: Muhammed Efe Cetin <efectn at protonmail.com>
> Signed-off-by: Jacobe Zang <jacobe.zang at wesion.com>
> ---
> .../boot/dts/rockchip/rk3588s-khadas-edge2.dts   | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts 
> b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
> index dbddfc3bb4641..b80a552dad883 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
> @@ -283,6 +283,22 @@ &pcie2x1l2 {
>  reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
>  vpcie3v3-supply = <&vcc3v3_pcie_wl>;
>  status = "okay";
> +
> + pcie at 0,0 {
> + reg = <0x400000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> + device_type = "pci";
> + bus-range = <0x40 0x4f>;
> +
> + wifi: wifi at 0,0 {
> + compatible = "pci14e4,449d";

Probably need to add "brcm,bcm4329-fmac" as well here.

Regards,
Arend





More information about the Linux-rockchip mailing list