[PATCH 7/7] arm64: dts: rockchip: set hdd led labels on qnap-ts433

Heiko Stuebner heiko at sntech.de
Thu Jul 25 12:45:39 PDT 2024


The automatically generated names for the LEDs from color and function
do not match nicely for the 4 hdds, so set them manually per the label
property to also match the LEDs generated from the MCU.

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index bff21684a3970..c35c11203e903 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -50,6 +50,7 @@ led-0 {
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_DISK;
 			gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+			label = "hdd1:green:disk";
 			linux,default-trigger = "disk-activity";
 			pinctrl-names = "default";
 			pinctrl-0 = <&hdd1_led_pin>;
@@ -59,6 +60,7 @@ led-1 {
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_DISK;
 			gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+			label = "hdd2:green:disk";
 			linux,default-trigger = "disk-activity";
 			pinctrl-names = "default";
 			pinctrl-0 = <&hdd2_led_pin>;
@@ -68,6 +70,7 @@ led-2 {
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_DISK;
 			gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
+			label = "hdd3:green:disk";
 			linux,default-trigger = "disk-activity";
 			pinctrl-names = "default";
 			pinctrl-0 = <&hdd3_led_pin>;
@@ -77,6 +80,7 @@ led-3 {
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_DISK;
 			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "hdd4:green:disk";
 			linux,default-trigger = "disk-activity";
 			pinctrl-names = "default";
 			pinctrl-0 = <&hdd4_led_pin>;
-- 
2.39.2




More information about the Linux-rockchip mailing list