[PATCH v8 3/3] arm64: dts: rockchip: add DT entry for RNG to RK356x
Daniel Golle
daniel at makrotopia.org
Sun Jul 21 06:49:17 PDT 2024
On Sun, Jul 21, 2024 at 02:07:23PM +0200, Jason A. Donenfeld wrote:
> On Sun, Jul 21, 2024 at 01:48:38AM +0100, Daniel Golle wrote:
> > From: Aurelien Jarno <aurelien at aurel32.net>
> >
> > Enable the just added Rockchip RNG driver for RK356x SoCs.
> >
> > Signed-off-by: Aurelien Jarno <aurelien at aurel32.net>
> > Signed-off-by: Daniel Golle <daniel at makrotopia.org>
> > ---
> > arch/arm64/boot/dts/rockchip/rk3568.dtsi | 7 +++++++
> > arch/arm64/boot/dts/rockchip/rk356x.dtsi | 10 ++++++++++
> > 2 files changed, 17 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> > index f1be76a54ceb..b9c6b2dc87fa 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> > @@ -257,6 +257,13 @@ power-domain at RK3568_PD_PIPE {
> > };
> > };
> >
> > +&rng {
> > + rockchip,sample-count = <1000>;
> > + quality = <900>;
>
> As I already wrote you for v7, quality is out of 1024, not 1000, so this
> won't hit 90% as you intend.
It's not actually 90%. Around 125 out of 1000 test runs are failing on
the R5C boards I got here, so that makes it 87.5% which is pretty close
to the 87.9% of the 900/1024 figure there, hence I kept it 900 despite
your comment.
>
> But also, I think putting this in the DT is a mistake. Other drivers
> don't generally do this, and if the hardware is actually the same piece
> to piece (it is...), then there's not per-manufactured unit tweaking
> needed. So keep this in the actual driver C like other drivers.
So quality should be assigned using the DT compatible, right?
And if needed we should have several of them, one for each SoC (if
testing now turns out to show that the results are specific for the SoC
rather than for the board).
More information about the Linux-rockchip
mailing list