[PATCH 2/2] arm64: dts: rockchip: Add support for rk3588 GenBook
Dragan Simic
dsimic at manjaro.org
Sat Jul 20 03:21:37 PDT 2024
Hello Andy,
I forgot to note something in my previous response, so please
see an additional note below.
On 2024-07-16 15:50, Dragan Simic wrote:
> On 2024-07-16 12:07, Andy Yan wrote:
>> 在 2024-07-15 22:47:04，"Dragan Simic" <dsimic at manjaro.org> 写道：
>>> On 2024-07-15 12:44, Andy Yan wrote:
>>>> At 2024-07-14 23:27:54, "Dragan Simic" <dsimic at manjaro.org> wrote:
>>>>> Please see a few comments below.
>>>>>
>>>>> On 2024-07-14 13:28, Andy Yan wrote:
>>>>>> Cool Pi GenBook works as a mother board connect with CM5 [0].
>>>>>
>>>>> s/mother board/carrier board/
>>>>
>>>> This can be changed to carrier board in next version。
>>>>
>>>>> s/CM5/GenM5/
>>>>
>>>> In fact, the SOM is called CM5 always[0]， even this laptop was
>>>> called cm5 laptop from the
>>>> very beginning of the design。
>>>> They just gave it a new name GenBook when it comes to crowdsupply.
>>>>
>>>> The dtsi for CM5 is aready landing upstream，I inclulde it in the
>>>> current genbook dts。
>>>>
>>>> [0]https://forum.cool-pi.com/topic/98/cool-pi-5-compute-module-minipc-carrier-board-spec
>>>
>>> Ah, that's quite interesting, it was probably renamed for marketing
>>> purposes. Thanks for the clarification.
>>>
>>> To add to the confusion, none of "GenBook", "CM5" or "GenM5" appear
>>> on the labels found on the actual PCBs. [1] Instead, there are only
>>> some rather generic terms.
>>
>> So we can keep the name as it is now ？
>
> As far as I'm concerned, yes. Everything points to "CoolPi CM5"
> and "CoolPi GenBook" being the rigth names in the upstream kernel
> for the SoM and the carrier board, respectively.
>
> However, please see another comment below.
>
>>> [1]
>>> https://www.crowdsupply.com/img/6185/60c35852-7a58-4b6f-80fc-af3a0e3d6185/genbook-rk3588-main-board-close-up_jpg_gallery-lg.jpg
>>>
>>>>>> Specification:
>>>>>> - Rockchip RK3588
>>>>>> - LPDDR5X 8/32 GB
>>>>>> - eMMC 64 GB
>>>>>> - HDMI Type A out x 1
>>>>>> - USB 3.0 Host x 1
>>>>>> - USB-C 3.0 with DisplayPort AltMode
>>>>>> - PCIE M.2 E Key for RTL8852BE Wireless connection
>>>>>> - PCIE M.2 M Key for NVME connection
>>>>>> - eDP panel with 1920x1080
>>>>>>
>>>>>> This patch add basic support to bringup eMMC/USB HOST/WiFi
>>>>>> and can also drive a HDMI output with out of tree hdmi patches.
>>>>>>
>>>>>> [0]
>>>>>> https://www.crowdsupply.com/shenzhen-tianmao-technology-co-ltd/genbook-rk3588
>>>>>>
>>>>>> Signed-off-by: Andy Yan <andyshrk at 163.com>
>>>>>> ---
>>>>>>
>>>>>> arch/arm64/boot/dts/rockchip/Makefile | 1 +
>>>>>> .../dts/rockchip/rk3588-coolpi-genbook.dts | 296
>>>>>> ++++++++++++++++++
>>>>>> 2 files changed, 297 insertions(+)
>>>>>> create mode 100644
>>>>>> arch/arm64/boot/dts/rockchip/rk3588-coolpi-genbook.dts
>>>>>
>>>>> It would be better to split this into two files: a dtsi for the
>>>>> GenM5
>>>>> system
>>>>> on module, and a dts for the GenBook carrier board. That way, the
>>>>> dts(i) files
>>>>> would describe the actual hardware better.
>>>>>
>>>>>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile
>>>>>> b/arch/arm64/boot/dts/rockchip/Makefile
>>>>>> index 8fa469db400c..0fad54939bbd 100644
>>>>>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>>>>>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>>>>>> @@ -122,6 +122,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) +=
>>>>>> rk3568-wolfvision-pf5-display-vz.dtbo
>>>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) +=
>>>>>> rk3568-wolfvision-pf5-io-expander.dtbo
>>>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
>>>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
>>>>>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-genbook.dtb
>>>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
>>>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo
>>>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
>>>>>> diff --git
>>>>>> a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-genbook.dts
>>>>>> b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-genbook.dts
The new device dts file should be named rk3588-coolpi-cm5-genbook.dts
instead of rk3588-coolpi-genbook.dts, because that would:
(a) follow the "dependency graph" naming scheme, and
(b) make the naming scheme future-proof for some other SoM that
could possibly be made available for the GenBook in the
future, for which the new device dts file would be named
rk3588-coolpi-XYZ-genbook.dts.
>>>>>> new file mode 100644
>>>>>> index 000000000000..28357c6f05fb
>>>>>> --- /dev/null
>>>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-genbook.dts
>>>>>> @@ -0,0 +1,296 @@
>>>>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>>>>> +/*
>>>>>> + * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
>>>>>> + *
>>>>>> + */
>>>>>> +
>>>>>> +/dts-v1/;
>>>>>> +
>>>>>> +#include <dt-bindings/leds/common.h>
>>>>>> +#include "rk3588-coolpi-cm5.dtsi"
>>>>>> +
>>>>>> +/ {
>>>>>> + model = "RK3588 CoolPi GenBook";
>
> It would be better to omit "RK3588" from the model name and use
> "CM5" instead, because that more precisely reflects the "dependency
> graph", so to speak. Thus, I'd suggest that "CoolPi CM5 GenBook"
> is used as the model name.
>
> Technically, "CoolPi CM5 on GenBook carrier board" would be a more
> correct model name, so that's another option, but the above-proposed
> "CoolPi CM5 GenBook" sounds more like a finished product/device
> than just some carrier board with an SoM.
>
>>>>>> + compatible = "coolpi,genbook", "coolpi,pi-cm5",
>>>>>> "rockchip,rk3588";
>>>>>> +
>>>>>> + backlight: backlight {
>>>>>> + compatible = "pwm-backlight";
>>>>>> + enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
>>>>>> + pinctrl-names = "default";
>>>>>> + pinctrl-0 = <&bl_en>;
>>>>>> + power-supply = <&vcc12v_dcin>;
>>>>>> + pwms = <&pwm6 0 25000 0>;
>>>>>> + };
>>>>>> +
>>>>>> + leds: leds {
>>>>>> + compatible = "gpio-leds";
>>>>>> +
>>>>>> + heartbeat_led: led-0 {
>>>>>> + color = <LED_COLOR_ID_GREEN>;
>>>>>> + function = LED_FUNCTION_STATUS;
>>>>>> + gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
>>>>>> + linux,default-trigger = "heartbeat";
>>>>>> + };
>>>>>> +
>>>>>> + wlan_led: led-1 {
>>>>>> + color = <LED_COLOR_ID_GREEN>;
>>>>>> + function = LED_FUNCTION_WLAN;
>>>>>> + gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
>>>>>> + };
>>>>>> +
>>>>>> + charging_red: led-2 {
>>>>>> + function = LED_FUNCTION_CHARGING;
>>>>>> + color = <LED_COLOR_ID_RED>;
>>>>>> + gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
>>>>>> + };
>>>>>> + };
>>>>>> +
>>>>>> + vcc12v_dcin: vcc12v-dcin-regulator {
>>>>>> + compatible = "regulator-fixed";
>>>>>> + regulator-name = "vcc12v_dcin";
>>>>>> + regulator-always-on;
>>>>>> + regulator-boot-on;
>>>>>> + regulator-min-microvolt = <12000000>;
>>>>>> + regulator-max-microvolt = <12000000>;
>>>>>> + };
>>>>>> +
>>>>>> + vcc_sys: vcc-sys-regulator {
>>>>>> + compatible = "regulator-fixed";
>>>>>> + regulator-name = "vcc_sys";
>>>>>> + regulator-always-on;
>>>>>> + regulator-boot-on;
>>>>>> + regulator-min-microvolt = <7000000>;
>>>>>> + regulator-max-microvolt = <7000000>;
>>>>>> + vin-supply = <&vcc12v_dcin>;
>>>>>> + };
>>>>>> +
>>>>>> + vcc5v0_sys: vcc5v0-sys-regulator {
>>>>>> + compatible = "regulator-fixed";
>>>>>> + regulator-name = "vcc5v0_sys";
>>>>>> + regulator-always-on;
>>>>>> + regulator-boot-on;
>>>>>> + regulator-min-microvolt = <7000000>;
>>>>>> + regulator-max-microvolt = <7000000>;
>>>>>> + vin-supply = <&vcc_sys>;
>>>>>> + };
>>>>>> +
>>>>>> + vcc3v3_sys: vcc3v3-sys-regulator {
>>>>>> + compatible = "regulator-fixed";
>>>>>> + regulator-name = "vcc3v3_sys";
>>>>>> + regulator-always-on;
>>>>>> + regulator-boot-on;
>>>>>> + regulator-min-microvolt = <3300000>;
>>>>>> + regulator-max-microvolt = <3300000>;
>>>>>> + vin-supply = <&vcc5v0_sys>;
>>>>>> + };
>>>>>> +
>>>>>> + vcc3v3_lcd: vcc3v3-lcd-regulator {
>>>>>> + compatible = "regulator-fixed";
>>>>>> + regulator-name = "vcc3v3_lcd";
>>>>>> + enable-active-high;
>>>>>> + gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
>>>>>> + pinctrl-names = "default";
>>>>>> + pinctrl-0 = <&lcdpwr_en>;
>>>>>> + vin-supply = <&vcc3v3_sys>;
>>>>>> + };
>>>>>> +
>>>>>> + vcc5v0_usb: vcc5v0-usb-regulator {
>>>>>> + compatible = "regulator-fixed";
>>>>>> + regulator-name = "vcc5v0_usb";
>>>>>> + regulator-boot-on;
>>>>>> + regulator-always-on;
>>>>>> + enable-active-high;
>>>>>> + regulator-min-microvolt = <5000000>;
>>>>>> + regulator-max-microvolt = <5000000>;
>>>>>> + gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
>>>>>> + pinctrl-names = "default";
>>>>>> + pinctrl-0 = <&usb_pwren>;
>>>>>> + vin-supply = <&vcc_sys>;
>>>>>> + };
>>>>>> +
>>>>>> + vcc5v0_usb_host0: vcc5v0_usb30_host: vcc5v0-usb-host-regulator {
>>>>>> + compatible = "regulator-fixed";
>>>>>> + regulator-name = "vcc5v0_host";
>>>>>> + regulator-boot-on;
>>>>>> + regulator-always-on;
>>>>>> + enable-active-high;
>>>>>> + regulator-min-microvolt = <5000000>;
>>>>>> + regulator-max-microvolt = <5000000>;
>>>>>> + gpio = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
>>>>>> + pinctrl-names = "default";
>>>>>> + pinctrl-0 = <&usb_host_pwren>;
>>>>>> + vin-supply = <&vcc5v0_usb>;
>>>>>> + };
>>>>>> +};
>>>>>> +
>>>>>> +&gmac0 {
>>>>>> + status = "disabled";
>>>>>> +};
>>>>>> +
>>>>>> +/* M.2 E-Key */
>>>>>> +&pcie2x1l0 {
>>>>>> + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
>>>>>> + vpcie3v3-supply = <&vcc3v3_sys>;
>>>>>> + pinctrl-names = "default";
>>>>>> + pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron
>>>>>> &bt_pwron>;
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&pcie2x1l2 {
>>>>>> + status = "disabled";
>>>>>> +};
>>>>>> +
>>>>>> +&pcie30phy {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +/* M.2 M-Key ssd */
>>>>>> +&pcie3x4 {
>>>>>> + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
>>>>>> + vpcie3v3-supply = <&vcc3v3_sys>;
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&pinctrl {
>>>>>> + lcd {
>>>>>> + lcdpwr_en: lcdpwr-en {
>>>>>> + rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
>>>>>> + };
>>>>>> +
>>>>>> + bl_en: bl-en {
>>>>>> + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
>>>>>> + };
>>>>>> + };
>>>>>> +
>>>>>> + usb {
>>>>>> + usb_pwren: usb-pwren {
>>>>>> + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> + };
>>>>>> +
>>>>>> + usb_otg_pwren: usb-otg-pwren {
>>>>>> + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> + };
>>>>>> +
>>>>>> + usb_host_pwren: usb-host-pwren {
>>>>>> + rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> + };
>>>>>> + };
>>>>>> +
>>>>>> + wifi {
>>>>>> + bt_pwron: bt-pwron {
>>>>>> + rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> + };
>>>>>> +
>>>>>> + pcie_clkreq: pcie-clkreq {
>>>>>> + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> + };
>>>>>> +
>>>>>> + pcie_rst: pcie-rst {
>>>>>> + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> + };
>>>>>> +
>>>>>> + wifi_pwron: wifi-pwron {
>>>>>> + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> + };
>>>>>> +
>>>>>> + pcie_wake: pcie-wake {
>>>>>> + rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
>>>>>> + };
>>>>>> + };
>>>>>> +};
>>>>>> +
>>>>>> +&pwm6 {
>>>>>> + pinctrl-0 = <&pwm6m1_pins>;
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&sdmmc {
>>>>>> + status = "disabled";
>>>>>> +};
>>>>>> +
>>>>>> +&sfc {
>>>>>> + pinctrl-names = "default";
>>>>>> + pinctrl-0 = <&fspim2_pins>;
>>>>>> + status = "okay";
>>>>>> +
>>>>>> + flash at 0 {
>>>>>> + compatible = "jedec,spi-nor";
>>>>>> + reg = <0x0>;
>>>>>> + spi-max-frequency = <100000000>;
>>>>>> + spi-rx-bus-width = <4>;
>>>>>> + spi-tx-bus-width = <1>;
>>>>>> + };
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy0 {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy0_otg {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&usbdp_phy0 {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy1 {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy1_otg {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy2 {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy3 {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy2_host {
>>>>>> + phy-supply = <&vcc5v0_usb_host0>;
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&u2phy3_host {
>>>>>> + phy-supply = <&vcc5v0_usb>;
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&usbdp_phy1 {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +/* For Keypad */
>>>>>> +&usb_host0_ehci {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&usb_host0_ohci {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +/* Type C port */
>>>>>> +&usb_host0_xhci {
>>>>>> + dr_mode = "peripheral";
>>>>>> + maximum-speed = "high-speed";
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +/* connected to a HUB for camera and BT */
>>>>>> +&usb_host1_ehci {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +&usb_host1_ohci {
>>>>>> + status = "okay";
>>>>>> +};
>>>>>> +
>>>>>> +/* USB A out */
>>>>>> +&usb_host1_xhci {
>>>>>> + dr_mode = "host";
>>>>>> + status = "okay";
>>>>>> +};
More information about the Linux-rockchip
mailing list