[PATCH 1/4] arm64: dts: rockchip: Move device specific properties
Chris Morgan
macroalpha82 at gmail.com
Tue Jan 23 13:21:08 PST 2024
From: Chris Morgan <macromorgan at hotmail.com>
Move device specific properties related to the ADC Joystick to
different board specific device trees. This is in preparation for
adding the Anbernic RG-Arc series of devices.
Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
.../dts/rockchip/rk3566-anbernic-rg353x.dtsi | 74 +++++++++++++++++++
.../dts/rockchip/rk3566-anbernic-rg503.dts | 74 +++++++++++++++++++
.../dts/rockchip/rk3566-anbernic-rgxx3.dtsi | 74 -------------------
3 files changed, 148 insertions(+), 74 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
index 2a2821f4c580..63a18ff36cea 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
@@ -8,11 +8,73 @@
#include "rk3566-anbernic-rgxx3.dtsi"
/ {
+ adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&adc_mux 0>,
+ <&adc_mux 1>,
+ <&adc_mux 2>,
+ <&adc_mux 3>;
+ pinctrl-0 = <&joy_mux_en>;
+ pinctrl-names = "default";
+ poll-interval = <60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis at 0 {
+ reg = <0>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <1023 15>;
+ linux,code = <ABS_X>;
+ };
+
+ axis at 1 {
+ reg = <1>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <15 1023>;
+ linux,code = <ABS_RX>;
+ };
+
+ axis at 2 {
+ reg = <2>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <15 1023>;
+ linux,code = <ABS_Y>;
+ };
+
+ axis at 3 {
+ reg = <3>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <1023 15>;
+ linux,code = <ABS_RY>;
+ };
+ };
+
+ adc_mux: adc-mux {
+ compatible = "io-channel-mux";
+ channels = "left_x", "right_x", "left_y", "right_y";
+ #io-channel-cells = <1>;
+ io-channels = <&saradc 3>;
+ io-channel-names = "parent";
+ mux-controls = <&gpio_mux>;
+ settle-time-us = <100>;
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&vcc_sys>;
pwms = <&pwm4 0 25000 0>;
};
+
+ gpio_mux: mux-controller {
+ compatible = "gpio-mux";
+ mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+ <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+ #mux-control-cells = <0>;
+ };
};
&cru {
@@ -83,6 +145,18 @@ button-right {
linux,code = <BTN_DPAD_RIGHT>;
};
+ button-thumbl {
+ gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "THUMBL";
+ linux,code = <BTN_THUMBL>;
+ };
+
+ button-thumbr {
+ gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "THUMBR";
+ linux,code = <BTN_THUMBR>;
+ };
+
button-y {
gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
label = "WEST";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
index c763c7f3b1b3..94e6dd61a2db 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
@@ -17,6 +17,61 @@ aliases {
mmc2 = &sdmmc2;
};
+ adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&adc_mux 0>,
+ <&adc_mux 1>,
+ <&adc_mux 2>,
+ <&adc_mux 3>;
+ pinctrl-0 = <&joy_mux_en>;
+ pinctrl-names = "default";
+ poll-interval = <60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis at 0 {
+ reg = <0>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <1023 15>;
+ linux,code = <ABS_X>;
+ };
+
+ axis at 1 {
+ reg = <1>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <15 1023>;
+ linux,code = <ABS_RX>;
+ };
+
+ axis at 2 {
+ reg = <2>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <15 1023>;
+ linux,code = <ABS_Y>;
+ };
+
+ axis at 3 {
+ reg = <3>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <1023 15>;
+ linux,code = <ABS_RY>;
+ };
+ };
+
+ adc_mux: adc-mux {
+ compatible = "io-channel-mux";
+ channels = "left_x", "right_x", "left_y", "right_y";
+ #io-channel-cells = <1>;
+ io-channels = <&saradc 3>;
+ io-channel-names = "parent";
+ mux-controls = <&gpio_mux>;
+ settle-time-us = <100>;
+ };
+
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <3472000>;
@@ -36,6 +91,13 @@ battery: battery {
<3400000 0>;
};
+ gpio_mux: mux-controller {
+ compatible = "gpio-mux";
+ mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+ <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+ #mux-control-cells = <0>;
+ };
+
gpio_spi: spi {
compatible = "spi-gpio";
pinctrl-names = "default";
@@ -174,6 +236,18 @@ button-right {
linux,code = <BTN_DPAD_RIGHT>;
};
+ button-thumbl {
+ gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "THUMBL";
+ linux,code = <BTN_THUMBL>;
+ };
+
+ button-thumbr {
+ gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "THUMBR";
+ linux,code = <BTN_THUMBR>;
+ };
+
button-y {
gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
label = "WEST";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
index 8cbf3d9a4f22..18b8c2e7befa 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
@@ -14,51 +14,6 @@ chosen: chosen {
stdout-path = "serial2:1500000n8";
};
- adc-joystick {
- compatible = "adc-joystick";
- io-channels = <&adc_mux 0>,
- <&adc_mux 1>,
- <&adc_mux 2>,
- <&adc_mux 3>;
- pinctrl-0 = <&joy_mux_en>;
- pinctrl-names = "default";
- poll-interval = <60>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- axis at 0 {
- reg = <0>;
- abs-flat = <32>;
- abs-fuzz = <32>;
- abs-range = <1023 15>;
- linux,code = <ABS_X>;
- };
-
- axis at 1 {
- reg = <1>;
- abs-flat = <32>;
- abs-fuzz = <32>;
- abs-range = <15 1023>;
- linux,code = <ABS_RX>;
- };
-
- axis at 2 {
- reg = <2>;
- abs-flat = <32>;
- abs-fuzz = <32>;
- abs-range = <15 1023>;
- linux,code = <ABS_Y>;
- };
-
- axis at 3 {
- reg = <3>;
- abs-flat = <32>;
- abs-fuzz = <32>;
- abs-range = <1023 15>;
- linux,code = <ABS_RY>;
- };
- };
-
adc_keys: adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
@@ -77,16 +32,6 @@ button-mode {
};
};
- adc_mux: adc-mux {
- compatible = "io-channel-mux";
- channels = "left_x", "right_x", "left_y", "right_y";
- #io-channel-cells = <1>;
- io-channels = <&saradc 3>;
- io-channel-names = "parent";
- mux-controls = <&gpio_mux>;
- settle-time-us = <100>;
- };
-
gpio_keys_control: gpio-keys-control {
compatible = "gpio-keys";
pinctrl-0 = <&btn_pins_ctrl>;
@@ -128,18 +73,6 @@ button-start {
linux,code = <BTN_START>;
};
- button-thumbl {
- gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
- label = "THUMBL";
- linux,code = <BTN_THUMBL>;
- };
-
- button-thumbr {
- gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
- label = "THUMBR";
- linux,code = <BTN_THUMBR>;
- };
-
button-up {
gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
label = "DPAD-UP";
@@ -172,13 +105,6 @@ button-vol-up {
};
};
- gpio_mux: mux-controller {
- compatible = "gpio-mux";
- mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
- <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
- #mux-control-cells = <0>;
- };
-
hdmi-con {
compatible = "hdmi-connector";
ddc-i2c-bus = <&i2c5>;
--
2.34.1
More information about the Linux-rockchip
mailing list