[PATCH v3 0/2] [v3]Add hantro g1 video decoder support for RK3588

[Nicolas Dufresne]

Le dimanche 31 décembre 2023 à 23:11 +0800, Jianfeng Liu a écrit :
> This is the v3 version of this series adding hantro g1 video decoder
> support for rk3588.
> 
> RK3588 has Hantro G1 video decoder known as VDPU121 in TRM of RK3588 which
> is capable to decode MPEG2/H.264/VP8 up to 1920x1088. This vpu ip is also
> found in RK3568.

The only concern I have is that we rejected enabling this VPU on RK3399, since
having two H.264 decoders was confusing userspace softwares at the time, causing
the slow one to be picked sometimes. I know the selection is not fully
implemented in GStreamer either, not sure for LibreELEC ffmpeg fork, Chromium or
Cros-codec.

Of course, its not a problem now, but only when someone provides an rkvdec2
driver that enables the much more capable HW decoder. Shall we hold on H.264
mainline for now ?

Nicolas

> 
> Test results from fluster can be found from thread of v2[1][2].
> 
> [1] https://lore.kernel.org/all/CAAXNxMT3f68-ptM7Crhrfmn7iwTyJc9pwz4Beob+5beVODaSHQ@mail.gmail.com
> [2] https://lore.kernel.org/all/20231230153159.3748580-1-liujianfeng1994@gmail.com
> 
> 
> Changes in v3:
>  - Drop code in hantro_drv.c because hantro g1 vpu in rk3588 is compatible
> with the one in rk3568, only adding devicetree node should work.
>  - Change devicetree node name to video-codec at fdb50000 to match the reg
> address.
>  - Add dt-bindings rockchip,rk3588-vpu compatible with rockchip,rk3568-vpu
>  - Link to v2: https://lore.kernel.org/all/20231228131617.3411561-1-liujianfeng1994@gmail.com
> 
> Jianfeng Liu (2):
>   arm64: dts: rockchip: Add Hantro G1 VPU support for RK3588
>   dt-bindings: media: rockchip-vpu: Add rk3588 vpu compatible string
> 
>  .../bindings/media/rockchip-vpu.yaml          |  3 +++
>  arch/arm64/boot/dts/rockchip/rk3588s.dtsi     | 20 +++++++++++++++++++
>  2 files changed, 23 insertions(+)
>